Belltech Drop Spindles & Baer kit parts
#1
Senior Member
Thread Starter
Join Date: Jul 1999
Location: San Diego, CA
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
Belltech Drop Spindles & Baer kit parts
Background:
The parts I am selling were bought and installed in March 2001. I blew the motor around summer 2002. The car has been parked since then in my backyard.
Bell Tech 2 inch drop spindles, with brackets for Baer's 12 inch SuperSport kit.
Bell Tech 1.75 inch rear drop springs
Since the drop spindles come drilled and installed with the Baer brackets, I thought I would also include the following in this sale:
Rear brackets to mount rear calipers
Rear Baer calipers, with parking brake cables
Rear brake pads (they still have some meat on them)
Front rotors - they have rust build up on them, but can be used for
comparison if you purchase new ones.
WHAT I DON'T HAVE: the front calipers and front pads. Unfortunately, they were accidentally thrown away during some house cleaning.
As mentioned before, some of these items (rotors, pads, brake lines) have been sitting around for 6 years, so I am simply throwing them in for comparison if someone wants to replace them new.
The Baer kit mimics an 88-92 Corvette setup. In case someone doesn't want to use more expensive Baer components, you can just go to your local auto parts stores for pads and rotors.
What I originally paid:
Front 12 inch SS Baer kit - $1200
Rear 12 inch Baer kit - $800
Bell tech drop spindles - $300
$600 takes it all.
Highest offer takes priority.
Please feel free to ask me any questions.
The parts I am selling were bought and installed in March 2001. I blew the motor around summer 2002. The car has been parked since then in my backyard.
Bell Tech 2 inch drop spindles, with brackets for Baer's 12 inch SuperSport kit.
Bell Tech 1.75 inch rear drop springs
Since the drop spindles come drilled and installed with the Baer brackets, I thought I would also include the following in this sale:
Rear brackets to mount rear calipers
Rear Baer calipers, with parking brake cables
Rear brake pads (they still have some meat on them)
Front rotors - they have rust build up on them, but can be used for
comparison if you purchase new ones.
WHAT I DON'T HAVE: the front calipers and front pads. Unfortunately, they were accidentally thrown away during some house cleaning.
As mentioned before, some of these items (rotors, pads, brake lines) have been sitting around for 6 years, so I am simply throwing them in for comparison if someone wants to replace them new.
The Baer kit mimics an 88-92 Corvette setup. In case someone doesn't want to use more expensive Baer components, you can just go to your local auto parts stores for pads and rotors.
What I originally paid:
Front 12 inch SS Baer kit - $1200
Rear 12 inch Baer kit - $800
Bell tech drop spindles - $300
$600 takes it all.
Highest offer takes priority.
Please feel free to ask me any questions.
#3
Supreme Member
iTrader: (25)
Join Date: Jul 2004
Location: Beautiful BC
Posts: 2,623
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
Re: Belltech Drop Spindles & Baer kit parts
pm sent
#4
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Re: Belltech Drop Spindles & Baer kit parts
PM sent.
Ed
Ed
#5
#6
Member
iTrader: (5)
Join Date: Jan 2004
Location: WPB, FL
Posts: 431
Likes: 0
Received 5 Likes
on
5 Posts
Car: '89 Trans Am GTA
Engine: TPI350
Transmission: 700r4
Axle/Gears: BW 3.27s
Re: Belltech Drop Spindles & Baer kit parts
wtf I sent him a PM at 4:30a THREE HOURS after he posted this... dammit another set of Belltech's eludes me again! Omar why didn't you reply to my PM? well if the new owner doesn't want the Belltech's PLEASE let me know. Thanks
#7
Supreme Member
iTrader: (25)
Join Date: Jul 2004
Location: Beautiful BC
Posts: 2,623
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
Re: Belltech Drop Spindles & Baer kit parts
don't feel too bad, he didn't reply to my PM either...
Trending Topics
#8
Member
iTrader: (5)
Join Date: Jan 2004
Location: WPB, FL
Posts: 431
Likes: 0
Received 5 Likes
on
5 Posts
Car: '89 Trans Am GTA
Engine: TPI350
Transmission: 700r4
Axle/Gears: BW 3.27s
Re: Belltech Drop Spindles & Baer kit parts
that's not much of a consolation, but thanks at least I know I'm not the only one...
#10
Banned
Join Date: Jan 2007
Location: NYTHIRDGEN
Posts: 1,088
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 T/A
Engine: PROCHARGED LB9
Transmission: FB BUILT 700r4 2200 stall
Axle/Gears: 10 BOLT EATON 3:73 POSI
Re: Belltech Drop Spindles & Baer kit parts
cant these drop spindles still be bought new?
#12
Banned
Join Date: Jan 2007
Location: NYTHIRDGEN
Posts: 1,088
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 T/A
Engine: PROCHARGED LB9
Transmission: FB BUILT 700r4 2200 stall
Axle/Gears: 10 BOLT EATON 3:73 POSI
#13
Member
iTrader: (5)
Join Date: Jan 2004
Location: WPB, FL
Posts: 431
Likes: 0
Received 5 Likes
on
5 Posts
Car: '89 Trans Am GTA
Engine: TPI350
Transmission: 700r4
Axle/Gears: BW 3.27s
Re: Belltech Drop Spindles & Baer kit parts
Racecraft Inc. makes them for our cars. There's actually a group purchase that I've been trying to organize since these belltechs don't really show up on here very often. Feel free to check it out. https://www.thirdgen.org/forums/grou...e-dropped.html
#14
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Re: Belltech Drop Spindles & Baer kit parts
With all due respect to all that showed interest and frustration, the seller DID state the following in his listing:
"$600 takes it all; Highest offer takes priority."
If some of you feel that I jumped in front of you I am sorry but I did take ALL parts and not just some, and was apparently the highest offer. If any of you would like a certain part/parts please PM me and I will try to accomodate you.
Thank you for understanding, no offense intended.
Ed
"$600 takes it all; Highest offer takes priority."
If some of you feel that I jumped in front of you I am sorry but I did take ALL parts and not just some, and was apparently the highest offer. If any of you would like a certain part/parts please PM me and I will try to accomodate you.
Thank you for understanding, no offense intended.
Ed
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
01-28-2016 09:58 PM