305 tbi, t-5 tranny in cocoa, fl
Thread Starter
Joined: Jun 2004
Posts: 327
Likes: 13
From: jacksonville, fl
Car: 1988 firebird
Engine: 305 tpi
Transmission: 95 T56
Axle/Gears: stock 10 built, yukon diff, 4.10
305 tbi, t-5 tranny in cocoa, fl
pulled the 88 305 tbi motor out of my car. and willing to sell as parts or whole. prefer whole. and i also prefer local for the heavy parts. but if money is right i will ship. heres the list of parts for now, all prices are negotionable.
whole engine- umm $300. obo. comes with edelbrock performer intake manifold, 1.6 comp gold self aligning narrow full roller rockers, mild cam, stock heads but have been ported polished 3 angle valve job shave .012 and z-28 springs, tbi bores have been polished up to, stock distributor, and complete bottom end. does not come with headers, pulleys, or water pump.
ecm and wire harness will come with the engine. just as soon as its out. it will be an uncut harness.
t-5 tranny, prefer to sell as a unit, and that would come with crossmember, centerforce dual friction clutch, flywheel, hurst shifter. the tranny needs a rebuild. still shifts to all gears and reverse. its not easy to shift. im not gonna lie i was rough on this tranny. and it actually held up, never stranded me. its the borg warner t-5.
i do have some pics of some of the items. ill post those shortly.
whole engine- umm $300. obo. comes with edelbrock performer intake manifold, 1.6 comp gold self aligning narrow full roller rockers, mild cam, stock heads but have been ported polished 3 angle valve job shave .012 and z-28 springs, tbi bores have been polished up to, stock distributor, and complete bottom end. does not come with headers, pulleys, or water pump.
ecm and wire harness will come with the engine. just as soon as its out. it will be an uncut harness.
t-5 tranny, prefer to sell as a unit, and that would come with crossmember, centerforce dual friction clutch, flywheel, hurst shifter. the tranny needs a rebuild. still shifts to all gears and reverse. its not easy to shift. im not gonna lie i was rough on this tranny. and it actually held up, never stranded me. its the borg warner t-5.
i do have some pics of some of the items. ill post those shortly.
Last edited by grove; Dec 6, 2008 at 10:46 PM. Reason: adding pictures
Supreme Member
iTrader: (10)
Joined: Oct 2007
Posts: 1,881
Likes: 2
From: Fl.
Car: 83 Trans Am / 96 Jeep XJ
Engine: 355 / 4.0 I6
Transmission: TH350 / Auto
Axle/Gears: 3.23 10-bolt / 4wd
Re: 305 tbi, t-5 tranny in cocoa, fl
If you decide to part out the engine, let me know.
Thanks
Thanks
Thread Starter
Joined: Jun 2004
Posts: 327
Likes: 13
From: jacksonville, fl
Car: 1988 firebird
Engine: 305 tpi
Transmission: 95 T56
Axle/Gears: stock 10 built, yukon diff, 4.10
Re: 305 tbi, t-5 tranny in cocoa, fl
300 for the motor, and 250 for the tranny. i prefer local pickup.
Trending Topics
Joined: May 2005
Posts: 856
Likes: 10
From: West Palm Beach, FL
Car: 1991 Z28
Engine: SBC
Transmission: 700R4
Axle/Gears: 2.73
Re: 305 tbi, t-5 tranny in cocoa, fl
im right in palm bay...i need a clutch, flywheel and the hydraulics for my t5 swap....if you consider parting..let me know
Supreme Member
iTrader: (10)
Joined: Oct 2007
Posts: 1,881
Likes: 2
From: Fl.
Car: 83 Trans Am / 96 Jeep XJ
Engine: 355 / 4.0 I6
Transmission: TH350 / Auto
Axle/Gears: 3.23 10-bolt / 4wd
Junior Member
Joined: Nov 2008
Posts: 8
Likes: 0
From: VA Beach, VA
Car: 91 Camaro RS
Engine: 305 bored 40 over, Built For Auto X
Transmission: 700r4, swapping to a T-5
Axle/Gears: 2.73
Re: 305 tbi, t-5 tranny in cocoa, fl
How much would you be willing to sell the trans, bellhousing, and clutch fork for??
Thread
Thread Starter
Forum
Replies
Last Post






