Started dismantling my 91Z28 project car at work today so here is the first round of parts.

• 36 mm front sway bar $30
• everything for the cruise control- make offer if interested
• good brake booster- $30
• master cylinder with resevoir- $30
• going with an aftermarket hood so the blisters are available as well
• removed the airbag, sensors and the control unit-make offer
• harwood 1 piece fiberglass nose
• fiberglass ram air hood

I recently picked up a 91 Z28 parts car no motor or trans but with wing and many pieces are good

all prices are OBO just no low balling please, I'll update the thread with more parts as I remove them. PM or post an e-mail for pictures of any of these items

 

LMK when u have a price on LCAs and panhard rod.
Also how much for just the ECM with prom.

 

wat part of new york your in?

im interested in the LCAs if tpi 383 doesnt take them and also the dual fans .

 

how much for shipping for that sway bar to 49056

 

shoot me an email when u figure out price on the torque arm
kevz28carter@yahoo.com

 

new from spohn it would be 180 for all of them so how about 125 plus shipping I'll take a picture of the stuff today at work since it's still on the car, just pm me an e-mail address

[QUOTE=eschevyrda wat part of new york your in?

im interested in the LCAs if tpi 383 doesnt take them and also the dual fans .[/QUOTE]

right now I'm at going to school at SUNY plattsburgh and these parts are up here with me. I'm from the albany area and will be on march break in a few weeks so we could probably work out a time and place to meet if your interested. How about an e-mail address and i'll get some pictures of the fans too.

 

I forgot to ak if the PHR and LCAs are the djustable ones? if NOT let the next guy inline have em..

What about that ECM without the harness?

 

ima pass on both , redoing the suspension on the car n the dam credit card bill came in the mail but thanks any way

 

This torque arm does it come with it's own crossmember or is it mounted to the end of the transmission like the stock one is?

 

Ya i forgot that the LCAs are adjustable and the panhard bar isn't, so I definetly won't sell the set for 125.

how about 150 on the LCAs
50 on the panhard bar
350 for the torque arm

the rod ends are a little dirty from the car sitting out for a year or so, but they only have about 2,000 miles on them and I will clean them up before I ship them. I've been swamped between school and work lately so I haven't had time to poke around and see what people normally charge for the ECM and prom here. I'll do that later tonight or tomorrow or just make me an offer.


Pictures of spohn stuff at http://s244.photobucket.com/albums/g...m/91%20camaro/ I'll ad more pictures later tonight for the sway bar and fans the ecm i'll take a pic of tomorrow at work

 

I'll still pass on the upention stuff. Rather rod end on one side and polly ball on the other. Plus I need a Adj. PHR

 

Will36,

Do you have the following parts available? I need these for my 92 Z28:

- Upper and Lower Radiator/Fan Mounts
- Upper - Wraps over radiator with 4 mounting bolts & has provision to mount fan
- Lower - Held in by 2 bolts - has 4 mounting clips for lower fan mounts
- Clips that hold on the hood struts
- Stock Valve Covers

Please send me pricing, condition and pictures if you have them.

Thanks,
Scott

 

I have everything your looking for minus the valve covers. I was planning on holding onto the upper radiator/fan mount for now since I'm not sure what I'm doing for a radiator yet. I have the fans removed they're in like new shape i'll take some pictures later tonight or tomorrow

 

pictures of the fans,mounts and sway bar added, I pulled the ECM but left it on my tool box I'll get a picture of that tomorrow

 

I'm interested in the cruise control stuff. Specifically the main vacuum diaphragm. PM sent...

 

PM'd about the ECM/PROM.

 

pictures of the ECM with prom and cover are up. I also added pictures of the mega shifter. I'll take 75 for the ECM with prom if your still interested

 

pm sent

 

looks like the fans and the ECM are spoken for all other parts still available also have a good AC heater box and blower motor that I just pulled off the car. The sphon cross member was notched for an exhaust I posted a picture. So make an offer on the torque arm.

 

bump

 

did u sell the ecm?

 

I will take the prop valve, it is for 4 wheel disc, right? let me know

 

is that $50 shipped for the panard bar?

 

payment sent on dual fan setup.

 

are you going to be using the e-brake, looking for the cable

 

86 T/A- the car is rear disc, all the prices are before shipping. PM me with your zip code and I'll get a quote to send both both parts.

383TPI- yes I sold the ECM to the next guy in line when I didn't hear back from you for a few days. Sorry, I have a brand new AC delco one that came with my 89 project car that I have tucked away at my parents house some where. I'll dig it out when I'm home in a week or so, I'll give you first option on that one if you haven't found another by then.

Mad Hatter- I'm using the brake parts from that car, but I have lost of extra parts laying around which cable are you looking for?

 

Thanks but I need a 7730 ecm/chip not a 165.

 

looking for the ebrake cable, from handle to brakes

 

Ok give me a few days to do some digging around I'm not even sure if the brake cables on the car are still good I'll get back to you as soon as I know one way or the other.

 

bump the car also has a good air bag and all related components they're available as well

 

pm sent

 

pm sent on valve covers

 

still have the trick front springs? SB springs right?

 

Yes I still have them and they are for a small block car

 

I need the interior (dash) harness for a 91 camaro

 

sorry not interested in selling the hirring harness I updated the list at the top of the thread. lowered some of my asking prices and removed parts I recieved payment for. For everybody who sent payment I recieved the money order for the panhard and valve yesterday and the ECM today all the parts will go out monday afternoon and I'll PM the tracking numbers. Feel free to make offers on the other stuff

 

bump pulled the dash today and removed the airbag, computer and all related sensors and harness they're all available if somebody needs them just make an offer.

 

I thought You sold the computer?

 

Yes i sold the ECM I was refering to the processor/controller for the airbag system.

 

all the parts that were paid for have been shipped and recieved make offers on the rest of the stuff I want it gone.

 

Is rhe cruis control stuff still around? or is it gone?

 

Still have everything from the cruise control system. PM me an offer if your interested in any or all of the parts

 

How is the dash pad?

 

sorry not interested in selling it

 

trick springs and double looped torque arm gone.

 

bump come on people school semester ends in 6 weeks i don't want to drag all this stuff home for the summer

 

I know this is kinda old, so not sure if you still got it, but do you still have the panhard bar and do you have any pictures of it? Probably be interested in picking it up, so if you can let me know which city you're in that would be great to get an idea.

 

No sorry that is long gone.

 

Figured it might be. No harm in asking though. Thanks!

 

not a problem I have lots of 3rd gen parts pm me a list of what you need if you like since we're not that far from each other