Parting out 89 GTA- lots of Aftermarket stuff
Thread Starter
Member
Joined: Apr 2004
Posts: 262
Likes: 2
From: Abilene, TX
Car: 1989 GTA
Engine: 5.7 TPI
Transmission: A4
Axle/Gears: 3.23
Parting out 89 GTA- lots of Aftermarket stuff
I finally decided to part out my complete 89 GTA because I junked the emissions then moved to Texas and can't get it inspected/ registered and not interested in converting it back... the good stuff:
Grey cloth fourth gen front seats- good shape
Trick Flow 195 heads
HSR
LT4 Hotcam
1.6 GMHPP roller rockers
30# SVO injectors
BK 58mm TB
350 block with approx 10k miles- good shape
TTops
AC delete pulley
MSD 6AL
4th Gen style Ram Air hood with airbox- needs paint and fitted
stock GTA wheels in average condition, one tire has dry rot... plenty of tread
Pretty much all interior/ exterior parts in decent-to-good condition- just ask.
OR take the entire car for $1,750. $11k in reciepts. PM me if interested, I will accept all reasonable offers.
Grey cloth fourth gen front seats- good shape
Trick Flow 195 heads
HSR
LT4 Hotcam
1.6 GMHPP roller rockers
30# SVO injectors
BK 58mm TB
350 block with approx 10k miles- good shape
TTops
AC delete pulley
MSD 6AL
4th Gen style Ram Air hood with airbox- needs paint and fitted
stock GTA wheels in average condition, one tire has dry rot... plenty of tread
Pretty much all interior/ exterior parts in decent-to-good condition- just ask.
OR take the entire car for $1,750. $11k in reciepts. PM me if interested, I will accept all reasonable offers.
Senior Member
iTrader: (5)
Joined: Feb 2005
Posts: 691
Likes: 0
From: meridian, idaho
Car: 92 1500p\u 2wd
Engine: 91 z28 tpi 355
Transmission: 91 700r4
Re: Parting out 89 GTA- lots of Aftermarket stuff
Trick Flow 195 heads
are they still on the car? got a part number? any port work or milling done to them? how many miles
are they still on the car? got a part number? any port work or milling done to them? how many miles
Want a title? Post!
iTrader: (1)
Joined: Feb 2009
Posts: 0
Likes: 0
From: northwest, indiana
Car: 1987 Firebird Formula
Engine: 350 TPI
Transmission: 700r4
Axle/Gears: 3:73 posi
Re: Parting out 89 GTA- lots of Aftermarket stuff
might be interested in some parts.. give me prices on the following shipped to 46405
(ttop headliner, ram air hood with air box, both trickflow heads, and the center piece between the taillights)
(ttop headliner, ram air hood with air box, both trickflow heads, and the center piece between the taillights)
Thread Starter
Member
Joined: Apr 2004
Posts: 262
Likes: 2
From: Abilene, TX
Car: 1989 GTA
Engine: 5.7 TPI
Transmission: A4
Axle/Gears: 3.23
Re: Parting out 89 GTA- lots of Aftermarket stuff
I believe they are TFS-30400006 but I can't recall the chamber or spring size... I'll repost this evening once I can get to the reciept. They were installed in 2005 with approximately 10k miles. They were straight out of the box. All parts are still currently installed and assembled.
Re: Parting out 89 GTA- lots of Aftermarket stuff
I need a center console and a rear spoiler. Have you priced any of the parts? I would take the whole car if I didn't live so far away and could come get it. you can email me at jbarnard@florzrite.com
Trending Topics
Member
Joined: Mar 2008
Posts: 178
Likes: 0
Car: 1987 Trans AM
Engine: Twin Turbo 6.0 LS2
Transmission: T56
Re: Parting out 89 GTA- lots of Aftermarket stuff
looking for the "Performance Sound" radio bezel and complete center console.
also how much for the seats?
also how much for the seats?
Re: Parting out 89 GTA- lots of Aftermarket stuff
Re: Parting out 89 GTA- lots of Aftermarket stuff
Got pics of the whole car?
Send them to kuehnfam@valornet.com please.
Send them to kuehnfam@valornet.com please.
Thread Starter
Member
Joined: Apr 2004
Posts: 262
Likes: 2
From: Abilene, TX
Car: 1989 GTA
Engine: 5.7 TPI
Transmission: A4
Axle/Gears: 3.23
Re: Parting out 89 GTA- lots of Aftermarket stuff
I need a center console and a rear spoiler. Have you priced any of the parts? I would take the whole car if I didn't live so far away and could come get it. you can email me at jbarnard@florzrite.com
Complete Heads: $450
COMPLETE HSR (fuel rail, lines, fittings, hardware, sensors) plus SVO 30# injectors $450
BBk 58mm throttle body: $150
LT4 Hotcam: $150
Hood +airbox: $300
Great shape ABS Headliner and sunvisors from Hawks: $100
4 gen gray cloth seats + rails, good shape: $100
Rear Spoiler: $75
I will try to attach assorted pics this evening. I appreciate the interest and I will try to be fair and accomodate everyone, I will send everything with original reciept when possible. Thanks!
Member
iTrader: (5)
Joined: Aug 2006
Posts: 311
Likes: 1
From: Stafford, Connecticut
Car: 87 Iroc
Engine: modified 350
Transmission: high performance built 700R4
Axle/Gears: Strange S60 3:73
Re: Parting out 89 GTA- lots of Aftermarket stuff
I am definitely interested in the heads
Re: Parting out 89 GTA- lots of Aftermarket stuff
still looking for pics of hood/airbox & 58mm BBK throttlebody to joel.hobbs@comcast.net Thanks.
Thread Starter
Member
Joined: Apr 2004
Posts: 262
Likes: 2
From: Abilene, TX
Car: 1989 GTA
Engine: 5.7 TPI
Transmission: A4
Axle/Gears: 3.23
Re: Parting out 89 GTA- lots of Aftermarket stuff
Got off work late and is already dark, try this link. Photos are about a year old but she hasn't moved since... the clearcoat has peeled considerably more. The hood and box was purchased from Ram Air Hoods... a thirdgen.org sponsor.
http://s55.photobucket.com/albums/g121/tlancer23/GTA/
-The heads part number was correct... TFS-30400006-CNC
-The complete HSR kit will include everything to install on TPI including my original sensors, fuel lines and fittings, hardware and vaccum fittings (that I used anyways) and offset shims for the four center bolts (my HSR was for pre-86 intake bolt pattern... I think all were?) FYI, I had to dremel off a small portion of my 58mm throttle body throttle linkage to fit over the fuel fitting.
http://s55.photobucket.com/albums/g121/tlancer23/GTA/
-The heads part number was correct... TFS-30400006-CNC
-The complete HSR kit will include everything to install on TPI including my original sensors, fuel lines and fittings, hardware and vaccum fittings (that I used anyways) and offset shims for the four center bolts (my HSR was for pre-86 intake bolt pattern... I think all were?) FYI, I had to dremel off a small portion of my 58mm throttle body throttle linkage to fit over the fuel fitting.
Last edited by pmpn; Apr 13, 2009 at 09:36 PM.
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: Parting out 89 GTA- lots of Aftermarket stuff
WOW if only I all the cash right this moment id buy the car and have it shipped. Good luck with the sale...I hope some one buys it in one piece because we all know how the gta's are a much harder find these days than the camaros esp with all those aftermarket parts!
Junior Member
iTrader: (3)
Joined: Mar 2009
Posts: 17
Likes: 0
From: 50 miles from philly
Car: 91 gta and chevy powered toyota
Engine: 5.7 in both of them
Transmission: 700r4 raptor
Axle/Gears: 3.73
Re: Parting out 89 GTA- lots of Aftermarket stuff
Got off work late and is already dark, try this link. Photos are about a year old but she hasn't moved since... the clearcoat has peeled considerably more. The hood and box was purchased from Ram Air Hoods... a thirdgen.org sponsor.
http://s55.photobucket.com/albums/g121/tlancer23/GTA/
http://s55.photobucket.com/albums/g121/tlancer23/GTA/
WHAT DO YOU WANT FOR THE AIRBOX?
SHIPPED TO 18092..
PM ME ..
Joined: Apr 2002
Posts: 2,029
Likes: 2
From: Ohio
Car: 88' Iroc-Z
Engine: LQ9
Transmission: T-56
Axle/Gears: 3.42
Re: Parting out 89 GTA- lots of Aftermarket stuff
how much for the body harness that plugs in to the firewall? driver side beside the brake booster.
Thread Starter
Member
Joined: Apr 2004
Posts: 262
Likes: 2
From: Abilene, TX
Car: 1989 GTA
Engine: 5.7 TPI
Transmission: A4
Axle/Gears: 3.23
Re: Parting out 89 GTA- lots of Aftermarket stuff
Vehicle is sale pending. Thank you for all the inquiries, I will update as circumstances change. Thanks!
Senior Member
iTrader: (5)
Joined: Dec 2006
Posts: 2,212
Likes: 0
From: Augusta, Ga
Car: 1987 Trans Am
Engine: 355ci L98 soon to be turbo'd
Transmission: 700R4
Axle/Gears: 2.73 posi
Re: Parting out 89 GTA- lots of Aftermarket stuff
Would you be willing to part with the injectors? if so, how much shipped to 30907? Thanks
Junior Member
Joined: Feb 2005
Posts: 12
Likes: 0
From: pa.
Car: 86firebird/86 trans am
Engine: 2.8ho/305HO 4BB
Transmission: WC T-5/700R4
Re: Parting out 89 GTA- lots of Aftermarket stuff
does it have a 9 bolt rear and if it does i'll give you a 100.00 for the axels
Member
iTrader: (1)
Joined: Jan 2008
Posts: 294
Likes: 2
From: Snohomish, WA
Car: All of them
Engine: zz4 350 with AFR 195's
Transmission: 700r4
Axle/Gears: 3.42
Re: Parting out 89 GTA- lots of Aftermarket stuff
Maybe I missed it, is the throttle body included with the HSR? Please send me an email or PM if the vehicle sale falls through. Would like to purchase one in the next week for my 1990 IROC vert and have feelers out on a couple, let me know soon.
Joined: Jun 2008
Posts: 160
Likes: 0
From: Waterloo, Iowa
Car: 1987 Pontiac Trans AM GTA
Engine: 5.7 LTR
Transmission: Automatic
Re: Parting out 89 GTA- lots of Aftermarket stuff
If it was me I would sell the whole car. The GTA looks like it was well taken care of.
Re: Parting out 89 GTA- lots of Aftermarket stuff
I've already put money down on the car and we have made arrangements for the balance to be paid when I go back down to pick up the car. I'll let him respond and confirm, but the car is no longer on the market, it in effect is already sold.
Senior Member
Joined: Dec 2007
Posts: 569
Likes: 0
From: Illinois
Car: 98 Camaro Z28
Engine: 346 LS1
Transmission: T56
Axle/Gears: 3:43
Re: Parting out 89 GTA- lots of Aftermarket stuff
has the car been sold yet? cause if not does the car run? and if i came down to buy would i be able to drive her home? let me no thanks.
Re: Parting out 89 GTA- lots of Aftermarket stuff
Car is SOLD, I picked it up last night and brought it home. Thanks, Tony, for being so patient.
This car is a one in a million buy and find!
My face is still hurting from the ear to ear grin I had the whole drive back home!
This car is a one in a million buy and find!
My face is still hurting from the ear to ear grin I had the whole drive back home!
Senior Member
iTrader: (3)
Joined: Jun 2005
Posts: 785
Likes: 0
From: Middleburg Hts. OH
Car: 85 T/A, 92 Rs
Engine: L98:D,L03:<
Transmission: 700r4x2
Axle/Gears: 3.23 bw, 2.73 10 bolt.
Re: Parting out 89 GTA- lots of Aftermarket stuff
orion650@hotmail.comEDIT i see the above post now, congrats that was a STEAAALL
Thread
Thread Starter
Forum
Replies
Last Post







