Nitrous Stuff, TH350 Trans Lines, K&N X-Stream Lid
Thread Starter
Joined: Jun 2000
Posts: 1,537
Likes: 49
From: Naperville, IL
Car: 89 Iroc Hardtop
Engine: LB9 w/G92 Pkg
Transmission: T5 5-Speed
Axle/Gears: 9-Bolt, 3.45
Nitrous Stuff, TH350 Trans Lines, K&N X-Stream Lid
ITEM 1: NEW Jegs PN# 16500 Nitrous switch for Holley 4150 style carbs. SOLD
ITEM 2: A new Harlan Engineering Nitrous window switch. This unit allows you to set an upper and lower RPM threshold, so your nitrous system can only activate within this RPM window. It is a great safety feature for any nitrous system, but especially necessary on manual transmission cars where a missed gear can mean a blown engine.
The Harlan Engineering window switch does not require extra “chips” or “pills” to set RPM’s. This is all done via dipswitches and all settings are explained in the detailed installation manual. This unit can be used on 4, 6 or 8 cylinder vehicles (also selectable via dipswitch). Harlan sells these for $50 + $5 shipping. I'll take $40 shipped.
ITEM 3: I have a brand new set of Inline Tube custom bent steel transmission lines used to install a TH350 transmission into a 3rd generation GM F-Body ( 1982-1992 Camaro and Firebird ). The rubber plugs have never been removed from the ends. I bought these lines and found out that they WILL NOT fit with Hooker long tube headers. If you have stock manifolds, or shorty headers, they will work just fine. I paid $65 + shipping. I'll take $50 shipped.
ITEM 4: Brand new K&N X-Stream air cleaner lid. This is the 14” model with a polished finish, PN# 66-1401XP. It is still factory sealed in plastic and was only out of the box for the picture. Paid $80, I'll take $70 shipped.
PLEASE NOTE that I only ship to the continental 48 US states. Sorry, I don't ship to Hawaii, Alaska, Canada, etc. I accept PayPal or USPS money orders. Please contact me with any questions.
ITEM 2: A new Harlan Engineering Nitrous window switch. This unit allows you to set an upper and lower RPM threshold, so your nitrous system can only activate within this RPM window. It is a great safety feature for any nitrous system, but especially necessary on manual transmission cars where a missed gear can mean a blown engine.
The Harlan Engineering window switch does not require extra “chips” or “pills” to set RPM’s. This is all done via dipswitches and all settings are explained in the detailed installation manual. This unit can be used on 4, 6 or 8 cylinder vehicles (also selectable via dipswitch). Harlan sells these for $50 + $5 shipping. I'll take $40 shipped.
ITEM 3: I have a brand new set of Inline Tube custom bent steel transmission lines used to install a TH350 transmission into a 3rd generation GM F-Body ( 1982-1992 Camaro and Firebird ). The rubber plugs have never been removed from the ends. I bought these lines and found out that they WILL NOT fit with Hooker long tube headers. If you have stock manifolds, or shorty headers, they will work just fine. I paid $65 + shipping. I'll take $50 shipped.
ITEM 4: Brand new K&N X-Stream air cleaner lid. This is the 14” model with a polished finish, PN# 66-1401XP. It is still factory sealed in plastic and was only out of the box for the picture. Paid $80, I'll take $70 shipped.
Pictures of everything are here: http://www.cardomain.com/ride/496327/12
PLEASE NOTE that I only ship to the continental 48 US states. Sorry, I don't ship to Hawaii, Alaska, Canada, etc. I accept PayPal or USPS money orders. Please contact me with any questions.
Last edited by GarageToys; Apr 15, 2009 at 09:10 PM.
Thread Starter
Joined: Jun 2000
Posts: 1,537
Likes: 49
From: Naperville, IL
Car: 89 Iroc Hardtop
Engine: LB9 w/G92 Pkg
Transmission: T5 5-Speed
Axle/Gears: 9-Bolt, 3.45
Re: Nitrous Stuff, TH350 Trans Lines, K&N X-Stream Lid
ITEM #1 - Nitrous switch is sold.
Last edited by GarageToys; Apr 15, 2009 at 09:10 PM.
Thread Starter
Joined: Jun 2000
Posts: 1,537
Likes: 49
From: Naperville, IL
Car: 89 Iroc Hardtop
Engine: LB9 w/G92 Pkg
Transmission: T5 5-Speed
Axle/Gears: 9-Bolt, 3.45
Re: Nitrous Stuff, TH350 Trans Lines, K&N X-Stream Lid
PM reasonable offers if you don't like the price. I'm trying to clean out the basement and fund a new project.
Supreme Member
iTrader: (4)
Joined: Jan 2005
Posts: 1,048
Likes: 1
From: Long Island, New York
Car: 1988 Firebird Formula
Engine: 388 Carb
Transmission: 700R4
Axle/Gears: 4.10
Re: Nitrous Stuff, TH350 Trans Lines, K&N X-Stream Lid
I checked out the pics, do you still have the 91-92 Taillight harness? I have been looking for one.
Thread Starter
Joined: Jun 2000
Posts: 1,537
Likes: 49
From: Naperville, IL
Car: 89 Iroc Hardtop
Engine: LB9 w/G92 Pkg
Transmission: T5 5-Speed
Axle/Gears: 9-Bolt, 3.45
Re: Nitrous Stuff, TH350 Trans Lines, K&N X-Stream Lid
Yes I do. It's listed on the "Exterior parts" board in this ad: https://www.thirdgen.org/forums/exte...-trans-am.html
PM me if you're interested.
PM me if you're interested.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM
