[TN] ls6 /ls1 swap engine harness pcm
Thread Starter
Junior Member
Joined: Jul 2006
Posts: 13
Likes: 0
From: Murfreesboro TN
Car: 87 black hardtop gta
Engine: L98
Transmission: 700r
Axle/Gears: 9 bolt 3.27
ls6 /ls1 swap engine harness pcm
i have a completet 20k mile ls6 shortblock out of 2004 vette. this one has factory coated skirt pistons, full floating pins. the motor is complete minus a couple accesory brackets. it was topped off with fbody intake and heads from a 99 camaro, all sensors, balancer, flexplate, coilpacks,waterpump, injectors fuel rails,wires, alterator, starter,etc.
are fbody too
you WILL need alt bracket and PS bracket, the ones i have are vette stuff, but you can have those with the deal as well.
i have a 99 camaro pcm and plastic cradle bracket, and an a4 harness that is pretty much unmolested. as well.
unfortunately i have run out of cash and steam on my swap.
i will take 2500$ cash for it all (VERY FIRM)
could do partial trades on 6 speed swap for my l98,nice set of wheels/tires, suspension goodies, black leather fourth gen seats, ????
are fbody too
you WILL need alt bracket and PS bracket, the ones i have are vette stuff, but you can have those with the deal as well.
i have a 99 camaro pcm and plastic cradle bracket, and an a4 harness that is pretty much unmolested. as well.
unfortunately i have run out of cash and steam on my swap.
i will take 2500$ cash for it all (VERY FIRM)
could do partial trades on 6 speed swap for my l98,nice set of wheels/tires, suspension goodies, black leather fourth gen seats, ????
Last edited by mr60ft; May 20, 2009 at 01:21 AM. Reason: fixed details
Thread
Thread Starter
Forum
Replies
Last Post





