ls1>*

iTrader: (32)

I have many many 82-92 (few 93-02) camaro and firebird parts from cars ive dissassembled over the years and its time to clean out the garage. including

many interior trim pieces
82-92 camaro fenders $50 each
82-92 firebird drivers side fender $50
85-92 camaro z28 hood with provisions for blisters or louvers (not included) great shape $75
pair of iroc hood louvers, missing tabs so ill let them both go for $40
hatch motors: 1 early style, and 2 92 style $45 each or 50 shipped
blower motors $20 each or 25 shipped
ac delete heater box $ 100 shipped
red lower console $40
manual trans shifter plates $55 shipped
lower trans shifter boots $25 shipped
crossmembers for 700r4 or t5 $25
driveshafts (both stock and aluminum) $40 for a steel shaft/$125 for a aluminum shaft
interior plastics in black and red
4th gen black/grey 4th gen seats. no significant damage, good bolsters, front and rear seats. No front tracks, but you would use your existing tracks from a 3rd or 4th gen as they are the same and are a direct bolt in. Only reason im selling is i bought a set of sparco buckets. Same reason im holding onto the tracks $250/set
clutch pedals for ls1 style t56 $50
89 camaro engine harness, and light harness. basically the complete harness for underhood all the way to the firewall and to the computer $60
87 iroc 305 carb auto ecm $40
89 iroc 305 tbi auto ecm $40
serpentine belt engine brackets $60
ac compressor for serpentine car in working order, no clutch noise $50
smog pump for serpentine car $30
ac condensor with lines for a serpentine car. car had a charge when removed $75
radiator $75
single electric fan assembly $75
camaro drivers side quarter panel complete and no rust $100
seat belt assemblys in black color
lots of under car plastic pieces for the front end
chin spoiler 85-90 z28/iroc/rs style $50
side rocker ground effects 85-90 style rs/z28/iroc $25/side 91-92 z28/rs $30/side
camaro rear bumper covers 85-90 style rs/z28/iroc $50 each 91-92 z28/rs style $60
set of used edelbrock valve covers $20 can have finish sandblasted for additional $10 for perimeter bolt heads
th350 trans mounted torque arm bracket $30
torque arm assemblys $20 for non g92 setup (have holes in center) $50 for g92 solid torque arm with a poly bushing $60
brake master cylinders $25 each
brake boosters $25 each
grid style taillight assemblies $20 each or 35/pr
early style coolant bottle (will work on all) like new (used for less than 200 miles) $20 or $30 shipped
ls1 exhaust manifolds $40
ls1 heads 853 casting with valves and springs, no retainers 30k miles $60
underdash covers and kick panels
low tension hood shocks (good for cowl hoods, or any aftermarket lighter hood) $50
good hatch shocks $40
horns $20 or 25 shipped
fan mounting brackets
tpi lower airboxes $30
fuel doors $10 each
clutch resevoir with hose to master $20
dash bezel covers
6 350tpi injectors $25
oem roller lifters with dogbones and spider $50
front license plate holder $15
rear trunk weatherstripping $20
third brake light assemblies
black sun visors in good shape for a hardtop car (will work in either) fabric not sagging, and they stayed in place in the car $40 or 45 shipped
taillight wiring harness $20
strut mounts $20
tbi/carb air cleaner with hose $30
used firestone firehawk sz50 ep 245/50/16 tire $25
automatic pedal assembly $30 or $40 shipped
ttop glass
wiper motors $25 or $35 shipped
93 z28 150 mph speedo cluster $60
big brake upgrade parts
98-02 front calipers $75 or $80 shipped
firebird/trans am dash map pocket good shape, doesnt hang open $40
2 gold dimpled style gta 16x8 wheels. good shape, no significant damage. Lightest factory thirdgen wheel, perfect for drag radials $125 can ship also

im sure

all pictures can be seen at this link 13 pages of photos

parts for sale pictures by randy87iroc - Photobucket

I am not a business, merely a thirdgen fanatic who has personally owned all of the cars these parts have came off of. I have accumulated these parts over the years and its time for them to go so i can have garage room. Im sure there are pieces not listed up there that i have or that i have pictures of. If you dont see it, just ask, alot of the small miniscule stuff is the stuff sometimes forgotten
if there is a shipped price, it is for the continetal US only
located on the southside of indianapolis for pickup, can meet or deliver for fuel compensation (reasonable distance), or can ship at buyers expense

email: streetracer420@hotmail.com or randyirocz@aol.com

ask for randy

thanks and have a great day

Rocket-Doc

iTrader: (11)

Can I get pics of the serp brackets...

and could you take 75 shipped??

Would be purchasing as soon as I make sure they are the correct ones that I need...

Thanks

ls1>*

iTrader: (32)

due to their size i will decline on the shipped part. I can get pics, and a shipping quote if you would like

Randy

kthxbai

iTrader: (5)

can you grab a pic of one of the horns for me?
looking to wire one in

spun350

I'm looking for fuel lines for TPI Speed Density set-up - the two short ones that go up underneath the alternator that connect to the fuel rail. Also needing the mounts that hold the coil that bolt to the intake and distributor hold-down.Zip 72715Thanks!Spun350 !!!! I got the parts that i needed !!!!!!!!!!

chevysquid

iTrader: (7)

Do you have a rear bumper ground effect in good condition and is it feasable to ship one to Washington state?

fergus

iTrader: (1)

I need the doors, what shape are they in? Also I need a 92 chin spoiler. Where are you in Indiana?

ls1>*

iTrader: (32)

no 91-92 chin spoilers.

i still have the doors, they are in good shape, no rust issues other than just needing to be painted to match whatever you may have. white in color

im pretty much right in indianapolis indiana.

Thanks

camarorsssss

iTrader: (2)

is the starter good? do you have an automatic shifter w cable and shifter plate?

fergus

iTrader: (1)

I want them. PM sent.

ellocojorge

iTrader: (1)

how much for the antenna shipped to 75228

ls1>*

iTrader: (32)

yes the starter is good. came off a running car just sold the engine.

im sure i can scrape up a shifter plate, shifter and cable... what year car do you have (yellow letter or white?)

ellocojorge

iTrader: (1)

you have a PM

camarorsssss

iTrader: (2)

I will take the starter, shipping is 11725. i have a 91 rs, i will just need the shifter plate if you have one in really good condition, no cracks or broken tabs.

BADMAN

iTrader: (13)

You have a PM.

ls1>*

iTrader: (32)

i think it can fit in a large flat rate box so 15 would do it... doesnt matter the weight if it it can fit in the box.

streetracer420@hotmail.com is my paypal for the starter.

the only yellow shifter plate i have has a crack... sorry. definately have a few manual ones though

Randy

kmann101

I need the door panels still got em any pics I'm up if fort wayne possible pick up

ls1>*

iTrader: (32)

yes both sets are available, please specify which ones you are wanting

kmann101

some pics of both sets would be great not sure yet

ls1>*

iTrader: (32)

all parts that i have pictures of now are available for viewing at the link below. I update this link with new parts every time i snap a pic or sell something.

http://smg.photobucket.com/albums/v3...%20for%20sale/

kmann101

looks like I will take the cloth door panels please call 260-580-9985

BADMAN

iTrader: (13)

Any pics of the rearview mirror yet? TTT

BADMAN

iTrader: (13)

ttt

rv34

Looking for a Dash pad for my firebird..I have trans am wheels, I have to grab a pic. How much for a heater box?

ls1>*

iTrader: (32)

pm sent

ellocojorge

iTrader: (1)

how much are you asking for the hood blisters shiiped? and do they come with the mounting tabs>

ls1>*

iTrader: (32)

hood blisters are 125. send me your zip code again. shouldnt be too much id say no more than 20 bucks. Yes all the mounting tabs are there and intact. not missing

kmann101

Randy I am still looking for door panels how much for the pair of black/ grey cloth shipped up to fort wayne

ls1>*

iTrader: (32)

they arent cheap to ship really, plus you pretty much have to buy a box big enough to ship them in. Since you are closer id think it would be cheaper to get them personally

kmann101

give me a call and lets talk details # sent in pm

SiCkRs

iTrader: (6)

What brake upgrades do you have

ls1>*

iTrader: (32)

i basically have a complete ls1 front brake upgrade kit spindles, hubs, pads, rotors, calipers, brackets, hoses.

SiCkRs

iTrader: (6)

Do you have a direct bolt or would i have to get some custom work

ls1>*

iTrader: (32)

its a bolt in

basiccamaro

What year or years does the chin spoiler fit? Thanks!

ls1>*

iTrader: (32)

85-90

1b rock

how much for the iroc wheels and hatch motor shipped to 62970 and will you sell two rear wheels or just set

ls1>*

iTrader: (32)

i really dont want to part the set since i have no use for them. i stripped the faces of 3 wheels and was working on the 4. i only want 100 for the wheels.

what year hatch motor do you need? i can get a shipping quote tomorrow

IROCZ28KevinZ

iTrader: (2)

how much for an ac delete heater box, and shipping to 65301? thanks

GREAT_WHITE

NO PRICE ON THE WHEEL SPACERS ? ARE THEY ALL THE SAME ? SIZE ?

ls1>*

iTrader: (32)

85 shipped for the delete box and motor.

ls1>*

iTrader: (32)

2 1 1/4 and 2 2"

60 shipped per pair

SiCkRs

iTrader: (6)

How much for the whole front brake upgrade kit then shipped to 90650 and can you send me some pics please

1b rock

my car is a 90 iroc with pull down hatch

GREAT_WHITE

60.00 FOR ALL ?

HAVE TO ASK

SiCkRs

iTrader: (6)

You said you only want $100 for the iroc wheels can you check shipping to 90650 i am looking for some if its not too much for shipping i will take them

ls1>*

iTrader: (32)

the whole front upgrade kit is pending local pickup.

ls1>*

iTrader: (32)

these are also pending pickup tomorrow, if they dont go typically i can get wheels shipped at about 20 a piece

ls1>*

iTrader: (32)

no thanks.

doesnt hurt to ask though.

the 2" spacers only have maybe 100 miles on them... those alone costed more than what you offered

ls1>*

iTrader: (32)

pretty sure i have one... all the hatch motors i have are in the pics... any of them look like yours??