86 vette engine. 350sbc bored +40 over, reconditioned rods, reconditioned crank. New bearings all over, new rings. Reonditioned heads, new springs stock, cleaned valves new seals. New lifters, pushrods, new cam (stock). All new gaskets, new oil pump, new waterpump, new starter, edelbrock shorty headers. Tranny is a 700r4, new torque converter. ( i have another trans as well.NO SHIPPING, The setup is in the car currently runing good. Intake setup is stock reuilt throttle body new sensors, msd ignition coil, msd cap and rotor, ignition module, 10mm spark plug wires, and new radiator hoses. all in all at least 1200, for another 200 i got cragar ss rims 15x8 fronts and 15x9 offset on rear with lugs and mounted tires the rear ones will need replaced 1500 for all of it or obo let me no. WILL HAVE TO PICK UP (JUST SO YOU REMEMBER THIS IS JUST TO SEE IF ANYONE IS INTERESTED) ( The engine is NOT a Hydralic roller it is a old style flat tappet. )

IF someone is interested i am planning on doing a lsx swap. So if you want a rear end from a stock formula 350 i will be selling lots of the stock parts once i get majority of the lsx parts but until then just peaking interest. This part out will be goin on about late summer or next winter. PM if interested will save you and let the ones that are interested first and give them a shot at this stuff so let me no. NO WILL PART OUT ENGINE( meaning will not sell the block alone it will come as turnkey stock tpi)