Parting out complete 1991 Z28
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Francisco, CA
Car: 1991 Z28, 1995 Blazer 4x4
Engine: 350 TPI, 4.3L vortech h.o.
Transmission: 700R4 (soon to be a t5), 4l60E
Parting out complete 1991 Z28
I am parting out a complete 1991 Z28 with 115,000 miles
Engine: 350 tpi, all stock
Transmission: 700R4, doesn't shift out of second
Rear end: Posi disc (not sure what gears, whatever came stock in a 91 z28 with a 350)
Body: Red
Interior: Black
Also for sale is KYB strut plates, A/C delete pulley, eibach sportline springs and T5 conversion setup.
Please let me know what your interested in and I'll provide you with a price.
Thanks,
Solomon
Engine: 350 tpi, all stock
Transmission: 700R4, doesn't shift out of second
Rear end: Posi disc (not sure what gears, whatever came stock in a 91 z28 with a 350)
Body: Red
Interior: Black
Also for sale is KYB strut plates, A/C delete pulley, eibach sportline springs and T5 conversion setup.
Please let me know what your interested in and I'll provide you with a price.
Thanks,
Solomon
Last edited by sfmaro; Apr 13, 2010 at 04:57 PM.
Junior Member
iTrader: (4)
Joined: Aug 2007
Posts: 83
Likes: 0
From: Brunswick, Ohio
Car: 1992 RS, 2000 Z28
Engine: LO3 with TPI Swap, LS1
Transmission: 700-R4, 4L60E
Axle/Gears: 3.42 with TruTrac LSD
Re: Parting out complete 1991 Z28
Complete engine wiring harness and ECM w/prom. These still available? or is all you have is what you list above? If the harness and ecm are still around how much you want for them?
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Francisco, CA
Car: 1991 Z28, 1995 Blazer 4x4
Engine: 350 TPI, 4.3L vortech h.o.
Transmission: 700R4 (soon to be a t5), 4l60E
Re: Parting out complete 1991 Z28
I do have the ecm and prom, not sure what they are worth so make me an offer.
Supreme Member
iTrader: (25)
Joined: Jul 2004
Posts: 2,623
Likes: 0
From: Beautiful BC
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
Re: Parting out complete 1991 Z28
what condition is the steering wheel and air bag like?
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Francisco, CA
Car: 1991 Z28, 1995 Blazer 4x4
Engine: 350 TPI, 4.3L vortech h.o.
Transmission: 700R4 (soon to be a t5), 4l60E
Re: Parting out complete 1991 Z28
steering wheel is peeling but the airbag is perfect
Trending Topics
Junior Member
iTrader: (4)
Joined: Aug 2007
Posts: 83
Likes: 0
From: Brunswick, Ohio
Car: 1992 RS, 2000 Z28
Engine: LO3 with TPI Swap, LS1
Transmission: 700-R4, 4L60E
Axle/Gears: 3.42 with TruTrac LSD
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Francisco, CA
Car: 1991 Z28, 1995 Blazer 4x4
Engine: 350 TPI, 4.3L vortech h.o.
Transmission: 700R4 (soon to be a t5), 4l60E
Re: Parting out complete 1991 Z28
25th92rs- yes I also do have the wiring harness. ecm, prom and harness: $175
Pairof91rss- bumper cover and chin spoiler: $150 Rear Spoiler: $125
Joee5- fog lights: $50, did you want just the switch as well?
Sgt.56- door panels are in perfect condition, send me your email for pics
Thenewstyle- A/C delete may already be sold, I'll let you know by Friday
Firenscuba- send me your email for pics of the wheels, rear: $200
14zroad- Joee5 has first dibs on the lights
Aztec12- Pairof91rss has dibs first on bumper cover and ground effect
Pairof91rss- bumper cover and chin spoiler: $150 Rear Spoiler: $125
Joee5- fog lights: $50, did you want just the switch as well?
Sgt.56- door panels are in perfect condition, send me your email for pics
Thenewstyle- A/C delete may already be sold, I'll let you know by Friday
Firenscuba- send me your email for pics of the wheels, rear: $200
14zroad- Joee5 has first dibs on the lights
Aztec12- Pairof91rss has dibs first on bumper cover and ground effect
Senior Member
iTrader: (1)
Joined: Apr 2007
Posts: 668
Likes: 4
From: Palm Coast, FL
Car: 86 T/A & 88 GTA
Engine: 305 LB9 TPI & 350 LO5 TPI
Transmission: Jasper 4L60 x2
Axle/Gears: 2.77/posi LSD & 2.73/posi LSD
Re: Parting out complete 1991 Z28
spindles driver and pass shipped 32164?
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Francisco, CA
Car: 1991 Z28, 1995 Blazer 4x4
Engine: 350 TPI, 4.3L vortech h.o.
Transmission: 700R4 (soon to be a t5), 4l60E
Re: Parting out complete 1991 Z28
Sgt.56- here are the pics of the door panels
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Francisco, CA
Car: 1991 Z28, 1995 Blazer 4x4
Engine: 350 TPI, 4.3L vortech h.o.
Transmission: 700R4 (soon to be a t5), 4l60E
Re: Parting out complete 1991 Z28
Pairof91rss- emailed you pics
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Francisco, CA
Car: 1991 Z28, 1995 Blazer 4x4
Engine: 350 TPI, 4.3L vortech h.o.
Transmission: 700R4 (soon to be a t5), 4l60E
Re: Parting out complete 1991 Z28
Aztec12- If you still need the bumper cover and ground effect they are available for $150
Theimpaler68- I'll get you a price this weekend
Theimpaler68- I'll get you a price this weekend
Junior Member
iTrader: (4)
Joined: Aug 2007
Posts: 83
Likes: 0
From: Brunswick, Ohio
Car: 1992 RS, 2000 Z28
Engine: LO3 with TPI Swap, LS1
Transmission: 700-R4, 4L60E
Axle/Gears: 3.42 with TruTrac LSD
Re: Parting out complete 1991 Z28
25th92rs- yes I also do have the wiring harness. ecm, prom and harness: $175
Pairof91rss- bumper cover and chin spoiler: $150 Rear Spoiler: $125
Joee5- fog lights: $50, did you want just the switch as well?
Sgt.56- door panels are in perfect condition, send me your email for pics
Thenewstyle- A/C delete may already be sold, I'll let you know by Friday
Firenscuba- send me your email for pics of the wheels, rear: $200
14zroad- Joee5 has first dibs on the lights
Aztec12- Pairof91rss has dibs first on bumper cover and ground effect
Pairof91rss- bumper cover and chin spoiler: $150 Rear Spoiler: $125
Joee5- fog lights: $50, did you want just the switch as well?
Sgt.56- door panels are in perfect condition, send me your email for pics
Thenewstyle- A/C delete may already be sold, I'll let you know by Friday
Firenscuba- send me your email for pics of the wheels, rear: $200
14zroad- Joee5 has first dibs on the lights
Aztec12- Pairof91rss has dibs first on bumper cover and ground effect
Joined: Oct 2007
Posts: 1,375
Likes: 6
From: Wyoming
Car: 1995 Formula
Engine: LT1 350
Transmission: Built 4L60e
Axle/Gears: 10 bolt, Eaton posi, 3.73's
Joined: Mar 2002
Posts: 854
Likes: 10
From: Rincon, Ga.
Car: 91 Camaro RS
Engine: 305 TPI conversion.
Transmission: T56
Axle/Gears: 3.73 posi 4th gen rear
Re: Parting out complete 1991 Z28
do you the entire tpi intake assembly, and how much to 31326?
Member
iTrader: (2)
Joined: Jan 2006
Posts: 103
Likes: 1
From: Ettrick WI
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: Parting out complete 1991 Z28
hows the speedometer, and the fog light harness . Les
Junior Member
iTrader: (2)
Joined: Sep 2007
Posts: 42
Likes: 0
From: Alabama
Car: 91 Z28
Engine: L98
Transmission: Automatic
Axle/Gears: 3:42
Re: Parting out complete 1991 Z28
Did you ever sell the Fog Lights to Joee5? If not how much and could you send pics?
Thanks,
Thanks,
Member
Joined: Jan 2004
Posts: 422
Likes: 0
From: silverton/salem, oregon
Car: 87 Trans am
Engine: 350 TPI
Transmission: built 700R4
Axle/Gears: BW 9 bolt posi w/ disc
Re: Parting out complete 1991 Z28
How much for the strut plates and ac delete pulley shipped to 97381?
Just for fun, what are you looking to get for the 5 speed swap?
Just for fun, what are you looking to get for the 5 speed swap?
Member
iTrader: (1)
Joined: Mar 2010
Posts: 172
Likes: 0
From: Santa Cruz ca
Car: 92 camaro B4C
Engine: 305
Transmission: t5
Re: Parting out complete 1991 Z28
I'm interested in the seats and the steering column is the column tight up and down and the condition of the seats thanks.
And can i pick them up im in Santa Cruz.
If 25th92RS is not interested in the ecm ill take it.
And can i pick them up im in Santa Cruz.
If 25th92RS is not interested in the ecm ill take it.
Last edited by 92RSMoneypit; Apr 22, 2010 at 04:33 PM.
Member
Joined: Feb 2010
Posts: 162
Likes: 1
From: savannah, ga
Car: 91 chevy camaro
Engine: 383
Transmission: 700r4 built with corvette servo
Axle/Gears: posi 3:73
Re: Parting out complete 1991 Z28
top of dash, the dash pad is it good if so pics and price shipped to 31405
Member
iTrader: (14)
Joined: Mar 2000
Posts: 254
Likes: 2
From: Painesville, Ohio USA
Car: 1989 IROC Z28
Engine: 305 TBI (L03)
Transmission: 700R4 w/ Corvette servo
Axle/Gears: 4th Gen, 3.23, posi, PBR
Re: Parting out complete 1991 Z28
Do you still have the tpi air filter assembly, both the upper Y piece and the lower piece it attaches to? Not sure this one is for an IROC, but I believe it looks like this.
If so, how much shipped to 44077?
If so, how much shipped to 44077?
Joined: Jul 2001
Posts: 529
Likes: 0
From: Richardson, TX
Car: 85 Iroc
Engine: 305 LB9
Transmission: 700r4
Axle/Gears: 3.27
Re: Parting out complete 1991 Z28
Looking for the rear disc setup if the car has a 10 bolt. Need the backing plates, brackets, PBR Clalipers, E-Brake Cable, Bracket and T connector that attaches to the e-brake handle. Lemme know how much shipped to 78613
Supreme Member
iTrader: (2)
Joined: Mar 2002
Posts: 1,029
Likes: 1
From: West Houston, Tx.
Car: 1991 Z28
Engine: 355 TPI
Transmission: 700r4
Axle/Gears: 9 bolt disc / 3:27
Re: Parting out complete 1991 Z28
ever sell the front chin spoiler? interested in that and the hardware. pm me with a response please
Joined: Sep 2005
Posts: 871
Likes: 4
From: Yreka, in the State of Jefferson
Car: 1991 red Z/28
Engine: 350 TPI
Transmission: T5 swap
Axle/Gears: 3.42
Re: Parting out complete 1991 Z28
Do you still have the throttle cable and the tranny kick down cable?? how much to 96097?
Member
Joined: Oct 2007
Posts: 413
Likes: 1
From: O'Fallon Mo.
Car: 1992 Camaro
Engine: HSR 355, afr 195s, xfi280, Holley e
Transmission: t-5
Axle/Gears: Braced 10 bolt Auburn and 3.73s
Re: Parting out complete 1991 Z28
im looking for complete tpi setup minus intake. so prom ecm. air box etc. thanks and let me know how much to ship to 63368
Joined: Apr 2006
Posts: 1,534
Likes: 3
From: Jacksonville, NC
Car: 92 Camaro
Engine: Dart SHP 406 HSR, LE heads
Transmission: Performabuilt Level 2, Vig 3200
Axle/Gears: S60 373
Re: Parting out complete 1991 Z28
how much for tpi duct (from filter to TB) to 23227?
Junior Member
iTrader: (4)
Joined: Aug 2007
Posts: 83
Likes: 0
From: Brunswick, Ohio
Car: 1992 RS, 2000 Z28
Engine: LO3 with TPI Swap, LS1
Transmission: 700-R4, 4L60E
Axle/Gears: 3.42 with TruTrac LSD
Re: Parting out complete 1991 Z28
Has anyone else bought anything from this guy and has not received anything? or not receive replies to messages sent to him?
Sometimes people get busy but I sent this guy money 3 weeks ago and now he seems to have fallen off the face of the planet. Could be a scam. I don't know. If anyone else has had problems let me know. And maybe this post will get this guy to wake up if he is truely "for real"
Sometimes people get busy but I sent this guy money 3 weeks ago and now he seems to have fallen off the face of the planet. Could be a scam. I don't know. If anyone else has had problems let me know. And maybe this post will get this guy to wake up if he is truely "for real"
Junior Member
iTrader: (4)
Joined: Aug 2007
Posts: 83
Likes: 0
From: Brunswick, Ohio
Car: 1992 RS, 2000 Z28
Engine: LO3 with TPI Swap, LS1
Transmission: 700-R4, 4L60E
Axle/Gears: 3.42 with TruTrac LSD
Re: Parting out complete 1991 Z28
Did you send him money as well? I'm kicking myself in the *** right now for sending him money so quick but he seemed legit to begin with. Not sure what to do at this point.
I know he said he had school and stuff that he was juggling and it's probably around finals time for him, which I know how that is, but maybe that was his cover. Not sure.
I know he said he had school and stuff that he was juggling and it's probably around finals time for him, which I know how that is, but maybe that was his cover. Not sure.
Joined: Sep 2005
Posts: 871
Likes: 4
From: Yreka, in the State of Jefferson
Car: 1991 red Z/28
Engine: 350 TPI
Transmission: T5 swap
Axle/Gears: 3.42
Re: Parting out complete 1991 Z28
Did you send him money as well? I'm kicking myself in the *** right now for sending him money so quick but he seemed legit to begin with. Not sure what to do at this point.
I know he said he had school and stuff that he was juggling and it's probably around finals time for him, which I know how that is, but maybe that was his cover. Not sure.
I know he said he had school and stuff that he was juggling and it's probably around finals time for him, which I know how that is, but maybe that was his cover. Not sure.
Junior Member
iTrader: (4)
Joined: Aug 2007
Posts: 83
Likes: 0
From: Brunswick, Ohio
Car: 1992 RS, 2000 Z28
Engine: LO3 with TPI Swap, LS1
Transmission: 700-R4, 4L60E
Axle/Gears: 3.42 with TruTrac LSD
Re: Parting out complete 1991 Z28
He did get back to me a day or two ago and he says he's still on it but had been busy with finals. I hope he gets back to the rest of you as well, so maybe he'll get going on this stuff again.
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Francisco, CA
Car: 1991 Z28, 1995 Blazer 4x4
Engine: 350 TPI, 4.3L vortech h.o.
Transmission: 700R4 (soon to be a t5), 4l60E
Re: Parting out complete 1991 Z28
25th92RS: I PM'd you the tracking numbers
Sorry I haven't responded to anyone. I'm finishing finals next week and will start to part out the car.
Sorry I haven't responded to anyone. I'm finishing finals next week and will start to part out the car.
Joined: Sep 2005
Posts: 871
Likes: 4
From: Yreka, in the State of Jefferson
Car: 1991 red Z/28
Engine: 350 TPI
Transmission: T5 swap
Axle/Gears: 3.42
Junior Member
Joined: Mar 2010
Posts: 54
Likes: 0
From: Manchester Md
Car: 1991 Camaro RS, 1987 Firebird
Engine: 305 TBI, 350 TPI
Transmission: 5 Speed, Auto
Axle/Gears: N/A someoone tell me
Re: Parting out complete 1991 Z28
i need the whole rear end is it still for sale and how much







