[WI] 82-02 brake components
Thread Starter
Supreme Member
iTrader: (5)
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
82-02 brake components
Buy my front caliper! I have no use for it.
Last edited by racing geek; May 31, 2010 at 09:40 PM.
Thread Starter
Supreme Member
iTrader: (5)
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: LS1 rear calipers
I've also got a brand new front passenger LS1 caliper with a used caliper bracket. I'll take $40 shipped for that. Here are pics of the caliper, but the bracket is in a similar condition to the rear brackets pictured above (just some rust.) I do have the anti-rattle clips for this front caliper as well. The caliper is currently in the plastic bag it came in when new and if you want, I can send the original caliper box when I ship you the caliper and bracket.


I have a couple more pics of this caliper and the numbers stamped into it if you want to see those as well.


I have a couple more pics of this caliper and the numbers stamped into it if you want to see those as well.
Last edited by racing geek; May 31, 2010 at 09:40 PM.
Thread Starter
Supreme Member
iTrader: (5)
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: LS1 rear calipers
Since I've had a couple pm's about it, the rear caliper brake hoses were cut because the hoses were being replaced with braided lines and it was quicker at the the time to remove the calipers this way.
I don't think I have any master cylinders laying around at the moment but I may be able to get both LT1 and LS1 brake master cylinders if there is interest. Same goes for LT1 calipers, caliper brackets, and the LT1 backing plates. I don't have any laying around but I know of some I could get. I do think I have another disk/disk proportioning valve from a third gen though.
I don't think I have any master cylinders laying around at the moment but I may be able to get both LT1 and LS1 brake master cylinders if there is interest. Same goes for LT1 calipers, caliper brackets, and the LT1 backing plates. I don't have any laying around but I know of some I could get. I do think I have another disk/disk proportioning valve from a third gen though.
Last edited by racing geek; Apr 17, 2010 at 06:44 PM.
Thread Starter
Supreme Member
iTrader: (5)
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: LS1 rear calipers
One pair of rear calipers and the front caliper is pending.
BUMP for the other pair of rear calipers!
BUMP for the other pair of rear calipers!
Thread Starter
Supreme Member
iTrader: (5)
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: LS1 rear calipers
I have dropped the prices to what I think is very reasonable. If you are interested but don't like the price, make me an offer. I need the cash to get my motorcycle back on the road so this stuff needs to move.
Thread Starter
Supreme Member
iTrader: (5)
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Thread
Thread Starter
Forum
Replies
Last Post
dbrochard
Engine/Drivetrain/Suspension Parts for Sale
6
Sep 19, 2015 08:13 PM




