These things are not selling locally and wanted cash over paypal but need these things gone.


-TBI Setup W/ Edelbrock Performer TBI 3704


Comes With Throttle Body that has had its bore ridges grinded down flat and given a grinding pass, Edelbrock Performer TBI 3704 Intake, New Autolite 8mm 90 Degree Spark Plug Wires, Distributor with new only test fired Accel Performance Cap and Rotor, Working Coil with Distributor cable, New Mr.Gasket 180F Thermostat and Housing. New CTS Sensor, Less than 250 mile Used EGR Valve with working EGR Solenoid. Injector Pod with Caprice 5.7L Injectors and Working FPR. Less than 250 mile IAC and working
TPS Sensor, Also comes with Trans/Throttle cable bracket. Also have a Edelbrock 14x3 Open Element but gonna see if it fits when shipping. Needs a new filter.


Asking $125 + Shipping.





-1988 Firebird Trans Am GTA 305 LB9 M5 Camshaft.


Basically from my understanding its a L98 cam. Very good condition.


Asking $15 + Shipping.





-Serpentine Belt System,


Was from my 1992 Camaro 305 L03. Comes with passenger side bracket with A/C Bypass Pulley and no Smog Pump working pensioner. Harmonic Balancer and Crank Pulley, Driver side bracket comes with year old 1250~ mile new looking Alternator and Stock Power steering Pump. Will include Water pump pulley. I also noticed a crack on the passenger side A/C & A.I.R bracket. It is fixable but no idea how it devoloped. Only thing that was never installed was the brace that runs from the bracket to the exhaust manifold due to running long tubes.


Asking $90 shipped.






- ECM out of my 92 RS 305 L03/700R4 MD8/2.73 GU3


Like it says came from my 305/700R4/GU3 92 RS. Stock chip incide. I will include 2 extra chips from other 305 L03/700R4 MD8 Thirdgens.


Asking $50 shipped


- Duralast Oil Pressure Switch


Purchased for my 305 L03 due to breaking the original one. Its part number PS207 at Autozone. Paid $28 + Taxes on it. It was used in 2 starts, one of which was to test it. Still even has the original white locking thread material on it. This also fits TPI motors as well.


Asking $15 shipped


I accept Paypal, Money Order would be a good as well and loved. Located in Chicago, IL 60632, about 15 mins from Midway Airport. My prices are OBO. PM for any questions. Have pictures on request.


Got any trades? 235 55 16/245 50 16 tires, LT1, Suspension parts are welcomed but pm me if so.


Pictures:

how much would shipping be for the tbi manifold to 27040 i dont need the open elemnet and if u could send me pics to arodthellama@aol.com i found the same naifold for $100 but if i get all the other stuff u got for a lil more im gonna take ur deal lol

Online Shipping Calc says $31 to ship. $150 shipped. Lmk

Interested in the whole serpentine setup. Need a pic to see if it'd work for me though as I'm not sure it's the same as the TPI one. could come pick it up.

I should have pictures of the serpent system up by tonight.

Pictures of the serpent system up. I will get the picture of the alt if needed but its there.

As for your question, I know TPI and TBI serpent systems are a tad different. I know this due to the fact that my friends 89 T/A GTA could not make the stock belt to route it for the Smog pump delete. While on my system it did without needing a larger belt than stock.


Also everything is OBO, give me an offer shipped or with shipping to be added and I might consider it. I just care about being covered on shipping.

pm'd on serpentine setup if it has all pulleys and brackets for a sbc 350 ill take it paypal waiting.

PM replied and Serpent system might be sold.


Lowered prices on some items. Need em gone! Give me a offer on the 3704! Want it gone taking space next to the garage fridge.

Serpent system sold and being packaged. Everything else still for sale.

TBI sold