i pulled the motor out of my 86 camaro and the body and short block are gone. now i have a list of parts that need to go. all prices are plus shipping unless you pick it up. i have pictures of all the parts. just ask and i will send


water pump, ran on a v-belt so it will not work on the serp belt cars $10
350 starter the higher torque factory starter with 2 tabs for the motor part $10
most of the brackets for a v belt system with water pump and crank pulley $5
edelbrock tes headers, just the parts that bolts to the heads $25
aluminum intake edelbrock #3701 $50
world products iron heads s/r torquer $500 for the pair

if any price is too high make me an offer. i am in franklinville south jersey

 

Umm edelbrock tes headers, just the parts that bolts to the heads cunfused u have a pic of what your talking about

 

here is a pic

 

damn that's a good deal on them. too bad im not in the market for headers...

 

Very interested in the headers quote to ship to 44483 do u have a model # for them Or atleast primary/collector size what about the y-pipe cash in hand waiting

 

???????

 

info on heads?

 

Heads are world.products iron s/r torquers.about.10k miles.67cc chambers. You can get more info at worldcastings.com

 

camaroinoh
there is a pic of the headers in this thread. that is all i have to sell. y-pipe is not that hard to have made. i will work on shipping today and get back to you

 

jersyboyy

forgot to mention that a set of crane roller tipped rockers comes with the heads. and i can send pics if wanted

 

bump

 

Btw, in case anyone is interested in knowing, those particular TES headers are the correct ones for a TBI (L03) motor. You can tell by the heat stove tube on the one header. They'll work on any thirdgen though, whether it's carb, TPI, or TBI.

 

U get anywhere with the shipping

 

i need these parts gone. prices are dropped

 

Still got the headers?

 

yup

 

are the heads still for sale? located in flemington new jersey..

 

very interested in the heads if still for sale thanks

 

yes tthe heads are still for sale too

 

yea im looking for some 72-76cc aftermarket heads to bring down the compression on my motor, built it not thinking about fuel and gas mileage....now im kicking my *** for having 11:1 compression with iron heads...nothing less than 104 octane unless i tear the motor apart and shave the pistons down
GLWS

 

PM'd

 

bump

 

Is the starter a T5 starter and will you just sell the end housing - the part that bolts to the engine? And you want $10? Thanks.

 

i am not sure about it being a t5 starter. it came off of a 350 that was bolted to a 700r4. i can get some pics of it and send them to you if you pm me your email address.yes i will pull off the nose and yes $10

 

Ok yes please do that, I'll send you a PM. Thanks.

 

do u still have the headers if so can u tell me shipping to 28694

 

sorry sold them just the other day

 

Do you have the casting or part number for the heads?

 

Hi I am looking for a stock crank pulley to fit my 1985 T/A. If it is the 5 groove 2v configuration, could you tell me what diameter it is?

Thanks