[WA] PART OUT: 88 TA w/ LT1 383 and Tremec 3550
Thread Starter
Member
Joined: Mar 2003
Posts: 152
Likes: 0
From: Richland, WA
Car: 1989 Trans Am
Engine: 94 383 LT-1
Transmission: Tremec 3550
PART OUT: 88 TA w/ LT1 383 and Tremec 3550
Oil pump took a crap and spun a rod bearing. I haven't been driving the car anyway so I'm just going to part it out. I'm so done with the car I just want it gone. Give me some best offer prices.
LOCATION: SE WASHINGTON
Engine:
94 LT-1
LE2 Cam $100
Corvette Mini starter $75
D-port headman shorties $50
03 terminator (mustang cobra) 41lbs injectors w/ adapters $150
All accessories minus AC
port matched intake manifold
Also opti is brand new. just put it on not 200 miles ago. $100
Drivetrain:
Tremec 3550 w/ 3rd gen install kit (includes bellhousing adapter, bellhousing, spohn crossmember, yoke) $1500
Spec stage 3 clutch $200
Steeda Tri-Ax short shifter $100
94 F-body differential 3.73 richmond gears w/ limited slip
Chassis:
Spohn 6 point roll bar (welded in)
Spohn subframe connectors (welded in, can cut these out) $150
Spohn Adj panhard $75
Spohn LCA and LCA brackets $75
biggest Spohn front and rear swaybars $250
Spohn steering brace $40
2in drop springs $100
I'm sure there is more so just ask.
LOCATION: SE WASHINGTON
Engine:
94 LT-1
LE2 Cam $100
Corvette Mini starter $75
D-port headman shorties $50
03 terminator (mustang cobra) 41lbs injectors w/ adapters $150
All accessories minus AC
port matched intake manifold
Also opti is brand new. just put it on not 200 miles ago. $100
Drivetrain:
Tremec 3550 w/ 3rd gen install kit (includes bellhousing adapter, bellhousing, spohn crossmember, yoke) $1500
Spec stage 3 clutch $200
Steeda Tri-Ax short shifter $100
94 F-body differential 3.73 richmond gears w/ limited slip
Chassis:
Spohn 6 point roll bar (welded in)
Spohn subframe connectors (welded in, can cut these out) $150
Spohn Adj panhard $75
Spohn LCA and LCA brackets $75
biggest Spohn front and rear swaybars $250
Spohn steering brace $40
2in drop springs $100
I'm sure there is more so just ask.
Last edited by Fei; Sep 13, 2011 at 04:57 PM.
Member
Joined: Nov 2009
Posts: 415
Likes: 0
From: Pasco, WA
Car: 88 Iroc Z, 00 SS
Engine: 5.7 HSR, 5.7 LS1
Transmission: 700r4, T56
Axle/Gears: 3.23, 3.42
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
what condition is your front bumper in, and how much would you be willing to sell it for? what kind of rear end, and how much for the spohn sway bars?
Supreme Member
iTrader: (3)
Joined: Jul 2009
Posts: 1,311
Likes: 3
From: Chicago, IL
Car: 1986 Pontiac Firebird
Engine: 97 LT1 W/ Alot of goodies.
Transmission: 4L60E W/ Yank SS3600
Axle/Gears: 3.27 9 Bolt BW
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
What would be the price for the starter and heads? How many miles?
Very interested in the starter and maybe the heads. Pictures would be great.
Very interested in the starter and maybe the heads. Pictures would be great.
Thread Starter
Member
Joined: Mar 2003
Posts: 152
Likes: 0
From: Richland, WA
Car: 1989 Trans Am
Engine: 94 383 LT-1
Transmission: Tremec 3550
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
I'm going to try to keep the body intact. I will sell the suspension seperate though. Large items would have to be pick up or you arrange for shipping.
Send me an offer. Anything reasonable will not be refused! The car is still completely together right now so I cannot get pics of the parts very well. I know it is tough to sell parts sight unseen.
Heads have unknown miles I purchased them used a few years ago. I've only put MAYBE 1000 miles on them.
Send me an offer. Anything reasonable will not be refused! The car is still completely together right now so I cannot get pics of the parts very well. I know it is tough to sell parts sight unseen.
Heads have unknown miles I purchased them used a few years ago. I've only put MAYBE 1000 miles on them.
Junior Member
iTrader: (1)
Joined: Aug 2011
Posts: 20
Likes: 0
From: Navarre, FL
Car: 91 Camaro RS
Engine: 5.0/305
Transmission: 700R4
Axle/Gears: 3.23
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
will you sell the 5spd pedals and slave hydraulics if so how much shipped to 32566?
Senior Member
Joined: Apr 2006
Posts: 685
Likes: 0
From: CT
Car: 1988 Iroc
Engine: 5.7L
Transmission: '96 T56, Hurst Shifter, Mech VSS
Axle/Gears: 3.45 9 Bolt
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
How much for the full 3550? Shipped to 06111.
Can you tell me the mileage/year ect on the tag of the tranny and I will pm you an offer?
Can you tell me the mileage/year ect on the tag of the tranny and I will pm you an offer?
Trending Topics
Thread Starter
Member
Joined: Mar 2003
Posts: 152
Likes: 0
From: Richland, WA
Car: 1989 Trans Am
Engine: 94 383 LT-1
Transmission: Tremec 3550
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
ok lets move some of this stuff. I want this tremec gone. How about 1400 shipped including the shifter clutch and install kit?
Member
iTrader: (7)
Joined: Nov 2010
Posts: 179
Likes: 0
From: portland, michigan
Car: 85 iroc-z28
Engine: 049 headed bbc 4?? C.I.D
Transmission: T56
Axle/Gears: 3:73 posi
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
What style of spohn control arms are they? Also I'm guessing the brackets that come with them are relocation brackets.
Member
iTrader: (7)
Joined: Nov 2010
Posts: 179
Likes: 0
From: portland, michigan
Car: 85 iroc-z28
Engine: 049 headed bbc 4?? C.I.D
Transmission: T56
Axle/Gears: 3:73 posi
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
First inline on the bars and brackets let me know if there are tubular or not and I will paypal you thanks
Thread Starter
Member
Joined: Mar 2003
Posts: 152
Likes: 0
From: Richland, WA
Car: 1989 Trans Am
Engine: 94 383 LT-1
Transmission: Tremec 3550
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
I have a pending sale on all the suspension stuff. They are just basic tubular non spherical LCA with weld in brackets I can cut out. Cutting the cage out would be ugly. I would prefer it go with the roller.
Thread Starter
Member
Joined: Mar 2003
Posts: 152
Likes: 0
From: Richland, WA
Car: 1989 Trans Am
Engine: 94 383 LT-1
Transmission: Tremec 3550
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
I'm gonna give the sell on the suspension go one more day then I will start to sell seperate
Member
iTrader: (7)
Joined: Nov 2010
Posts: 179
Likes: 0
From: portland, michigan
Car: 85 iroc-z28
Engine: 049 headed bbc 4?? C.I.D
Transmission: T56
Axle/Gears: 3:73 posi
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
I'm first inline for the lowers and relocation brackets
Junior Member
Joined: Nov 2008
Posts: 51
Likes: 0
From: Topeka, KS
Car: Blue 86 IROC-Z
Engine: 305 TPI, Soon a 355 TPI
Transmission: Auto, Soon a WCT-5
Axle/Gears: Nine Bolt, 3.42 posi
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
Milege on the transmission and clutch? Any additional information about the transmission (gear ratios, etc.).
Thread Starter
Member
Joined: Mar 2003
Posts: 152
Likes: 0
From: Richland, WA
Car: 1989 Trans Am
Engine: 94 383 LT-1
Transmission: Tremec 3550
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
pending sell on transmission. It is a tremec 3550 so it is one step below what used to be the TKO. they only make tko 500 and 600 now though.
http://www.ttcautomotive.com/english...ts/tr-3550.asp is the link. it has the .68 overdrive
oh trans probably has, hell I dunno I daily drove it for years and it made a couple cross country trips. I bought it in '01 but stopped driving it in '06 well I guess that would be close to 50k that seems high to me but 35k is probably close. Clutch is practically new. 5k or less.
http://www.ttcautomotive.com/english...ts/tr-3550.asp is the link. it has the .68 overdrive
oh trans probably has, hell I dunno I daily drove it for years and it made a couple cross country trips. I bought it in '01 but stopped driving it in '06 well I guess that would be close to 50k that seems high to me but 35k is probably close. Clutch is practically new. 5k or less.
Last edited by Fei; Sep 13, 2011 at 09:26 PM.
Thread Starter
Member
Joined: Mar 2003
Posts: 152
Likes: 0
From: Richland, WA
Car: 1989 Trans Am
Engine: 94 383 LT-1
Transmission: Tremec 3550
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
Sprint performance. I think. I got them in 99 or 00 can't remember. Ride was amazing though! I know at least one person on here has been for a ride in it.
Junior Member
Joined: Nov 2008
Posts: 51
Likes: 0
From: Topeka, KS
Car: Blue 86 IROC-Z
Engine: 305 TPI, Soon a 355 TPI
Transmission: Auto, Soon a WCT-5
Axle/Gears: Nine Bolt, 3.42 posi
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
let me know if the transmission sale falls through, I might be interested. Thx.
Junior Member
Joined: Nov 2008
Posts: 51
Likes: 0
From: Topeka, KS
Car: Blue 86 IROC-Z
Engine: 305 TPI, Soon a 355 TPI
Transmission: Auto, Soon a WCT-5
Axle/Gears: Nine Bolt, 3.42 posi
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
transmission sale still pending?
Senior Member
Joined: Oct 2010
Posts: 885
Likes: 0
From: bellingham WA
Car: 85 Z28
Engine: 327
Transmission: 700R4
Axle/Gears: 3.23
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
want sfc,s. do you get to other side of mountian. may want other suspention parts. email me, jeremiah34@gmail.com. i will forget to check this to see your response
Member
Joined: Nov 2009
Posts: 415
Likes: 0
From: Pasco, WA
Car: 88 Iroc Z, 00 SS
Engine: 5.7 HSR, 5.7 LS1
Transmission: 700r4, T56
Axle/Gears: 3.23, 3.42
Re: PART OUT: 88 TA w/ LT1 383 and Tremec 3550
just sold a car and have funds for the maro, any chance you still have some stuff left?
Thread
Thread Starter
Forum
Replies
Last Post
UltRoadWarrior9
Tech / General Engine
336
Apr 28, 2020 10:39 PM
88SS6SPEED
Engine/Drivetrain/Suspension Parts for Sale
7
Nov 11, 2015 07:05 AM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
Oct 8, 2015 08:34 PM





