93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
I have an entire drivetrain from a 1993 formula for sale. Had about 26k miles when pulled. I saw this entire setup run as well and it ran perfect except a possible exhaust leak from passenger header.
LT1/T56 with entire engine harness and PCM
Driveshaft
Rear end with 3.42 gears and disc brakes
4th gen gas tank with new fuel pump
I bought all this for a CMC camaro build but unfortunately have to get out of racing all together. I am also putting up the 1989 RS roller up for sale with this entire drivetrain for $2100. I also have T-56 crossmembers (i will throw one in free if interested in taking everything here otherwise they are for sale individually see other posting). Basically no rust on the 89 RS, it has a cut out for the T-56 swap and has thirdgen manual pedals
All for $1800 (without roller) obo PICKED UP. do not with to ship any of this as i dont have anything to box/crate these things. I am located in Bellmore, Long Island.
LT1/T56 with entire engine harness and PCM
Driveshaft
Rear end with 3.42 gears and disc brakes
4th gen gas tank with new fuel pump
I bought all this for a CMC camaro build but unfortunately have to get out of racing all together. I am also putting up the 1989 RS roller up for sale with this entire drivetrain for $2100. I also have T-56 crossmembers (i will throw one in free if interested in taking everything here otherwise they are for sale individually see other posting). Basically no rust on the 89 RS, it has a cut out for the T-56 swap and has thirdgen manual pedals
All for $1800 (without roller) obo PICKED UP. do not with to ship any of this as i dont have anything to box/crate these things. I am located in Bellmore, Long Island.
Last edited by SomeGuy25thZ; Sep 4, 2011 at 02:27 PM.
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank
more pics...
Want a title? Post!
Joined: Apr 2011
Posts: 0
Likes: 0
From: Ottawa , On. Canada
Car: 91 Firebird Formula
Engine: 5.7 TPI
Transmission: 700R
Axle/Gears: 3.23
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
Would you take $1500 for everything except the roller?
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
$1600 and its all yours minus the roller and crossmember.
Let me know.
Let me know.
Trending Topics
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
I have the same hood in black from my 1992 z28 in a box and ready to ship if interested. You must arrange all shipping costs and pick up from my house. PM me an offer. The hood has everything but the struts/mounting brackets, and the front spring and latch.
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
I don't think so. Email me at axp2170@gmail.com.
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
Everything still for sale. I will consider reasonable offers as well.
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
Nothing has sold... everything still for sale.
Junior Member
Joined: May 2007
Posts: 18
Likes: 0
From: Coatesville, PA
Car: 1988 Iroc Z
Engine: SBC 355 crate motor
Transmission: T56 6-speed
Axle/Gears: 7.5 stock Disc rear.
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
im interested in just the trans and bellhousing setup. How much would you want for it? Id be able to pick it up. Please let me know.
Junior Member
iTrader: (3)
Joined: Feb 2009
Posts: 17
Likes: 0
From: Perkasie, PA
Car: 1988 Iroc Z28
Engine: 350
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
i would be interested in that spare black hood you have if the price is right let me know just shoot me a pm
Member
iTrader: (2)
Joined: Jul 1999
Posts: 163
Likes: 0
From: Lynn Haven/Panama City, FL, USA
Car: 88 Monte SS
Engine: Super-rammed L-98 383
Transmission: T-56 6-Speed
Axle/Gears: 8.5" G-BODY G-80 3.73
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
No offense, but the picture of the LT-1/T-56 is from a 1994-97, NOT a 1993. Just an quick observation.
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: 93 formula Lt1/T56, 3.42 disc rear, driveshaft, gas tank, 89 RS Roller
ahh mistake on my end. see my signature, i have it as the correct year there, its a 1994. Either way none of this is for sale anymore. I am going to pursue the CMC build after much debate.
Thread
Thread Starter
Forum
Replies
Last Post
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
Aug 17, 2015 07:45 PM





