SOLD!!!!


I have a stock 91 305 TPI motor, wiring harness, computer and all the accessories I am trying to sell. The motor has 75k on it and was removed from my dads Camaro convertible so we could install a LT1. This is a speed density motor and ran great before being removed. AC did not work before being removed, but I do not know if it is the compressor or was a leak in the line as there was no freon in it. Not looking to ship, but may seperate for the right money. The wiring harness has all the plastic loom removed from it, but it was never cut or damaged in any way. We were going to use the harness on the swap, but after we stripped it we found a 91 V6 harness to use instead. I will get pics up tonight. Looking for $500 for the whole setup.

I am restoring a yellow 92 GTA and I am looking for the 14 mm bolt and metal clip that holds the alternator wiring. I believe that all 89-92 TPI cars came with these parts. There is no part numbers available for these parts so I am looking for good condition, rust free parts. Below is a picture for the bolt and clip.



I am also looking for 3 throttle body coolant clamps for 1991-92 TPI cars. I have tried buying them new but the 2 part numbers I have are for worm style clamps. I am looking for clamps in good condition that aren't rusty. Here are some pics:

I am looking for a sd harness and computer if you are willing to separate. Will need to ship to Georgia as well zip 30096.

I had those clamps, but don't know if they got tossed or not. I will look and get back to you. As for the harness I would like to keep the intake harness and computer all together right now. That may change if I don't get any other interest on it though. Thanks for looking.

Good morning. can you tell me when the last time the engine was run? Also, sre you selling it with the bell housing? And, can you take a bunch of photos and send them to me? I can send you my e-mail and phone. Thanks

The engine was last run in May. We removed the 305 the week before the Hot Rod Power Tour with the plan of getting the LT1 in it and running, but as with most things in life the easy swap took way longer than expected when we found a deep scratch in one of the LT1s cylinder walls. if you PM me your email I will send out all of the photos I have of the engine, harness and accessories and if you need more than I have I will gladly take more. Also I ran this with an automatic before so there is no bell housing with it.

Here are a few pics of it in the car and few out of the car. The only thing I do not have a picture of right now is the wiring harness.

heads shipped to 28012?

pm sent

I have a potnetial buyer coming down on Saturday to get the motor, so it is pending a sale as of now to samman198. Thanks and I will keep you updated.

pm sent