[DE] Cammed 350 LT1, built 4L60E, PCM, and Harness
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 46
Likes: 0
From: Hockessin, De
Car: 2005 GTO
Engine: LS2
Transmission: T56
Axle/Gears: 3.73 LSD
Cammed 350 LT1, built 4L60E, PCM, and Harness
I have a 350 LT1, 4L60E trans, PCM, and harness for sale. Basically, a complete package to bolt into your project and go. The LT1 came out of a 1994 Cadillac hearse and has 89,000 miles on it. I replaced the cam with a mild Comp Cam (218/224,.49xlift with 1.5 rockers). It has all new gaskets and seals except for head gaskets. It has a new timing chain and spark plugs,as well.
The 4L60E is from a 1995 Caprice and was rebuilt by Kellin Performance. It can hold about 500 HP and has a 2100 stall converter. The internals are brand new. No miles are on this trans.
The PCM was tuned for this set up by LT1pcmtuning.com. It has a 93 octane tune.
The wiring harness is complete and out of a 1995 Caprice. No cuts!
The engine also has all its accessories and comes with both an AC compressor and an AC delete pulley,so you are covered any way you decide to go.
I have a video of this engine running.
$1900 OBO
Call or text at 302 528 2562
Email at Marlsonautomotive@gmail.com
Or PM me
I need this gone

The 4L60E is from a 1995 Caprice and was rebuilt by Kellin Performance. It can hold about 500 HP and has a 2100 stall converter. The internals are brand new. No miles are on this trans.
The PCM was tuned for this set up by LT1pcmtuning.com. It has a 93 octane tune.
The wiring harness is complete and out of a 1995 Caprice. No cuts!
The engine also has all its accessories and comes with both an AC compressor and an AC delete pulley,so you are covered any way you decide to go.
I have a video of this engine running.
$1900 OBO
Call or text at 302 528 2562
Email at Marlsonautomotive@gmail.com
Or PM me
I need this gone
Last edited by MuhThugga; Nov 17, 2011 at 06:48 PM.
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 46
Likes: 0
From: Hockessin, De
Car: 2005 GTO
Engine: LS2
Transmission: T56
Axle/Gears: 3.73 LSD
Re: Cammed 350 LT1, built 4L60E, PCM, and Harness
Complete longblock. Obviously the accessories, harness, and computer are not in the picture.
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 46
Likes: 0
From: Hockessin, De
Car: 2005 GTO
Engine: LS2
Transmission: T56
Axle/Gears: 3.73 LSD
Re: Cammed 350 LT1, built 4L60E, PCM, and Harness
Will separate if someone wants just the engine or the transmission.
Member
iTrader: (1)
Joined: Sep 2011
Posts: 316
Likes: 0
From: Birmingham, Alabama!!!
Car: 1988 Iroc-Z
Engine: 350 TPI; Stock internals
Transmission: 700r4; TCI-CPVB; BW Hi-Frition
Axle/Gears: 4th gen 7.5 w/ 3:42 gear
Re: Cammed 350 LT1, built 4L60E, PCM, and Harness
Price separated... I'm going to be in need of a tranny
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 46
Likes: 0
From: Hockessin, De
Car: 2005 GTO
Engine: LS2
Transmission: T56
Axle/Gears: 3.73 LSD
Re: Cammed 350 LT1, built 4L60E, PCM, and Harness
Bump. Need this out of the garage. This is a really nice deal for someone who needs a powertrain for their vehicle.
Thread
Thread Starter
Forum
Replies
Last Post





