SBC BRODIX 11X HEADS
Thread Starter
Junior Member
iTrader: (10)
Joined: Nov 2005
Posts: 69
Likes: 0
From: delavan wiscons
Engine: 350
Transmission: t-5
SBC BRODIX 11X HEADS
Brodix -11X 23 degree heads. Fresh valve job, Fresh surface mill. Pressure check done, valve seals, and keepers.
Paper work will be included.
Vavle springs are good to .700 lift can get spring pressures to buyer. Heads are not assembled right now in case you would like a different spring installed. I will assemble the heads for no charge!
Port work done on the runner and chambers. However, I don't have any flow numbers. Heads on a pump gas 434" in a stock suspension 3rd gen firebird went 9.96 on less than 200hp of nitrous.
Questions, please call. 262 745 4880
Pic
http://i381.photobucket.com/albums/o...ix11xheads.jpg
36
00#
Paper work will be included.
Vavle springs are good to .700 lift can get spring pressures to buyer. Heads are not assembled right now in case you would like a different spring installed. I will assemble the heads for no charge!
Port work done on the runner and chambers. However, I don't have any flow numbers. Heads on a pump gas 434" in a stock suspension 3rd gen firebird went 9.96 on less than 200hp of nitrous.
Questions, please call. 262 745 4880
Pic
http://i381.photobucket.com/albums/o...ix11xheads.jpg
36
00# Last edited by scaryjerry; Dec 28, 2011 at 11:37 PM. Reason: Picture didnt work, added a link
Thread Starter
Junior Member
iTrader: (10)
Joined: Nov 2005
Posts: 69
Likes: 0
From: delavan wiscons
Engine: 350
Transmission: t-5
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
Jan 9, 2020 08:29 PM
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
Sep 2, 2015 02:45 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
