parting an 89 ta 305tpi/5speed....the tranny makes a whining noise but drives fine..has new clutch... the rear was out of a forth gen disk brake 3.42 gears... this is a running driving car,so if your close,you can come by for a ride... prefer local pick up on big parts..will ship the smaller pieces....prefer to sell the transmission as complete package,but may consider parting if enough people want the rest...let me know what you need..also have an 87 that was a 350/auto.. still have all the stock suspension,the 9bolt 3.27 rear,the wiring,tpi,ecm..everything but the motor and trans....

 

How much you want for a MAF sensor? And the shifter plate from the 5speed car?

 

Pm sent

 

how much for the rear end?

 

no maf..converted to speed density..the shifter plate from the 5speed,I want to sell as a whole package with the transmission
pm returned
I have 2 of them.. the 4th gen.. $150...the 9bolt...$200

 

Does it have the GTA rims? IF so are you willing to ship them?

 

yes it does..and yes I will ship...they are nasty right now,but I will clean them up and get some pics...

 

Do these cars both have clean titles?

PM me and let me know what you want for them whole or after they are parted.

 

Awesome, are they just dirty? As long as they are not curbed really bad. How are the tires? I am really interested. PM me pics and price shipped to 57701

 

Please Quote ECM(from 89 305 tpi) shipped to 32003.

 

yes they do..pm sent

I will get them cleaned up and get some pics..I will have to remove the tires to ship them..

since this is a 5 speed car,I am selling the ecm with the transmission for a 5speed swap..unless enough people want it in pieces...

 

you still have the pedals and slave? how much to 28144?

 

Upper radiator support? Picture, and price shipped to 48091

 

yes I still have the pedals and slave..I am tryin to sell the 5speed as a whole swap deal..but if I break it up,I will let you know
yes I still have that..will get you a pic

 

How much for the complete 5 speed swap?

 

I would like to get $650plus shipping for the whole swap...

 

How much for all 8 fuel injectors connector clips...the ones on the harness

 

sorry..I dont want to cut up a good harness

 

http://i271.photobucket.com/albums/j...y/DSCF3326.jpg
these are the 87gta wheels

http://i271.photobucket.com/albums/j...y/DSCF3321.jpg
these are the rear of the 89, they are not in as good as shape,but if your going to redo them..... $300 for the 87wheels,$250 for the 89wheels(all 4 of coarse)

 

Are the knock sensor and ESC (not sure of the verbage for that piece exactly) available?

 

yes they will be as soon as I pull the motor and trans..

 

Excellent.

 

Ok..I will mark them as spoken for... thanks

 

How bout the rear disc breaks to 46347

 

I would rather not part the rear,unless enough people want the rest of it...

 

how much for the motor? also price for the TPI setup with harness and comp.

 

What does the complete package include? I mainly need a WC T5 trans, but will consider getting all of the parts you have.....Don't need any electronics though. I have an 84 that I'm upgrading.

 

it is the wc t5...the package is the trans,shift plate,pedals,bellhousing,slave,clutch,ecm,steering column,etc.....is the trans the only thing you really need?? where are you located??

 

would you be picking it up??

 

Pm me on price for ECM and prom

 

yes i can pick it up

 

Why are you parting it out? If not parted out yet. How much for complete running car?

 

ok..I will pm you
the body is rusted out...only thing I done to it so far is pull most of the interior..

 

Did it have long tubes?

 

I have a pretty good example of an 84 Z. Under 120,000 miles. No dents no nuthin. My 5 speed is a little testy, and I'm putting in a 383, and want to have back up. Everything I have works....clutch, throwout etc, but some spares might be nice. Problem is, I'm in Texas, and I really don't have the time or equipment to come to Florida to pick up. Hope you have luck finding a local, but maybe we could work something out otherwise. Let me know. BTW, I really don't need the steering column. How is that a part of the trans package?

 

[QUOTE=upandcoming;5191769]ok..I will pm you


did you ever get a price on the motor? and also a price on the TPI swap parts?

 

the vats...

[QUOTE=projectredsled;5192886] sorry for the delay..pm sent

 

You still have the long tubes?

 

Are the GTA tail lights in good shape? How much shipped to 03865?

 

yes..dont know if I am going to get rid of them just yet...
yes the tail light are in good shape, however the center section has a crack it in...I will put them in a box and get you a shipping quote if your still interested..lmk..

 

Okay man, let me know if you do. I'm on the hunt so I can put my motor in.

 

Please send me a few pics first so you do t waste your time if I don't buy them.
Thanks for your time.

 

how much for all the vacuum lines and the 5 speed set up

 

how much for the tpi harness and intake i don't need the ecm.

 

Would you sell just the exhaust hangar off the tranny since people rather dream on this site than buy parts.

 

Do you still have the 5 spd swap? I wont need the steering column, how much and are you willing to ship to 15226? Thanks.

 

to everybody wanting parts from this car...

I will finally be pulling the motor and trans from the car later in the week..then I will get back to everyone.. sorry for the delay.. thanks

 

Wanting to know if you will pull the heads? if so how much?

 

pic of the rear wing please is it in good shape

 

I just got the motor pulled and to my surprize..its not a 305 at all..its a 350..
wing was trash,like most of the rubber wings...


most of the drivetrain has been sold... I still have the body parts and interior left..