Almost New SBC Heads/ New Edelbrock EPS Intake
Almost New SBC Heads/ New Edelbrock EPS Intake
SBC heads off a 350 crate mtr, casting # 33417369, used less than 1,000 miles, complete with Felpro head gaskets# 1003 $175 + ship.
New Edelbrock EPS #2701 intake, for traditional bolt pattern/angle, complete with Felpro #1205 gaskets, $100+ship.
Thanks for looking.
New Edelbrock EPS #2701 intake, for traditional bolt pattern/angle, complete with Felpro #1205 gaskets, $100+ship.
Thanks for looking.
Member
Joined: May 2010
Posts: 301
Likes: 1
From: shalimar florida
Car: 1992 pontiac firebird
Engine: 305 v8 lo3 201.5hp and 268.2 tq
Transmission: 4speed 700r4 corvette servo
Axle/Gears: 3.42 disk posi 4th gen rear swap
Re: Almost New SBC Heads/ New Edelbrock EPS Intake
whats the heads cc are they vortec what valve size?
Junior Member
iTrader: (3)
Joined: Apr 2012
Posts: 49
Likes: 0
From: Sitka, AK
Car: 1990 Camaro RS
Engine: 305 L03
Transmission: 700R-4
Axle/Gears: 2.73 Posi
Re: Almost New SBC Heads/ New Edelbrock EPS Intake
Cylinder Heads- part # 14034808 casting #33417369
1.94" Intake valve , 1.50" Exhaust Valve 76cc Combustion Chamber 7 Bolt style Exhaust Flange
Standard 85' and prior intake manifold bolt pattern. Perimeter bolt style Valve Covers.
This head is very similar to the old #882 castings from the 1970'sfound this at http://www.strokerengine.com/MrGoodwrench.html hope it helps. looks like they are just regular ol' heads.
1.94" Intake valve , 1.50" Exhaust Valve 76cc Combustion Chamber 7 Bolt style Exhaust Flange
Standard 85' and prior intake manifold bolt pattern. Perimeter bolt style Valve Covers.
This head is very similar to the old #882 castings from the 1970'sfound this at http://www.strokerengine.com/MrGoodwrench.html hope it helps. looks like they are just regular ol' heads.
Thread
Thread Starter
Forum
Replies
Last Post
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
Jan 18, 2016 08:00 AM
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 29, 2015 10:08 PM
