Have 3 different TBI manifolds for sale.

NIB Vortec TBI by Edelbrock. This was originally made for Marauder Marine. 2" bores and no EGR. Same casting # 3704 as the 'newer' Vortec manifold. $200
Add GM silicone manifold/head gaskets for $20.

Bored stock manifold. 2.030" diameter. real deal, not a hack job. #14102182. $50

Last one I don't expect much interest in but it was an interesting project.
Edelbrock Performer RPM manifold. Top was machined down for clearance and a 2" bore TBI adapter was welded on. Distributor hole was machined for Caprice distributor. I ran this with BB TBI for 3 years before putting the stock set-up back on. $50. I can post pics if you think you want it.

Derry, NH
Have pics but they are too big to attach. Drop me a PM if interested and I'll send you the pics.

 

I am not really interested but I would like the pics.

I was thinking about building a sheet metal manifold so I could run 18 deg heads on my 428 SB I am building. Always like to see how other people think.

 

Lil' bump.

 

One last bump.