Bored to 2" small block TBI, with 80lb injectors, diy afpr 18 lb spring, injector spacer has about 25k on it. Also included but not pictured: 5.7 tbi with ultimate mods -tbi needs bushings, additional afpr, stock spring, 5.7 injectors, misc gaskets and seals, IAC and fuel pressure gauge adapter and a 454 TBI $250
Moates USB Autoprom with 16 bin selector switch (G3 bank switching adapter and EX remote) and memcal header to read stock chips, includes TBI cal pak $225
Supplementary fuel injection with haltek boost reference computer. Bored to 2". $125
GMPP dual plane Vortec heads with 2" TBI adapter $125
2x 8625 (same as 7427) with 1 cal pak and a 7747 ECM $60
411 ECM with pigtails $65
Prices do not include shipping, may take BO or trades. Paypal only.
[IMG][/IMG]

[IMG][/IMG]

 

Price cut!!!

 

Are you willing to ship to Canada?

 

I can ship to Canada.

 

Any of this still available?

 

Everything is still available except for the autoprom

 

I don't get what your selling with the TBIs for $250. I am in need please respond. Where are you located?

 

does that intake have coolant passages running under the intake runners like a stocker?

 

You get a 350 tbi, a bored 350 tbi, 350 injectors, 454 injectors, injector pod, 2 x adjustable for, misc gaskets and seals, tips, fuel pressure gauge adapter and more.

 

That sounds great. Could you send me a picture of everything I get for $250? The shipping will be to 97016. After I get the photos I will need an invoice. I am assuming you have a PayPal account. You obviously know allot more then me I am new to this. This sounds like it is the perfect set up for my 350 transformation. I have a 330hp Vortec crate motor with a GMP intake and headers. All I will need now is a fuel pump and the chip I have the rest. Send the photos, and invoice with shipping quote to: gregl316@hotmail.com
Seeing that the TBI is 2" will I need my intake to be 2"? It is 1&3/4"
PS there's a guy that needs one of your intakes in the parts wanted section.

Could you get a shipping quote to 97016. If it is reasonable I want it for $200 but... here's the catch I don't have the money till next payday or until I sell some stuff. So if the shipping is around 20 bucks send me a PayPal invoice to;
gregl316@hotmail.com
I will write you, and see if you still have it first that is unless you want to hold it for me.
You seem very knowable what about these computers would they help me in tuning? Would your intake work better then my GMP intake? Please let me know I am new to this game. Give me a carb, and I can tune the hell out of that.

Your helping a guy out. OH and I have a GMP crate 330hp Vortec with an intake and headers w/2.5" or 3" ehhaust going through a hi flow cat. Haven't decided if the extra expence for the 3" is worth it. I have a transgo shift kit to go in. I am going to go with the stage 2 unless you would sugest different, a 2:4 or 2.7 I don't know which ever is stock rear end. I am swapping the 305 with 164000 miles on it for the 350. That should wake my 91 Vert rite up. Hoping for 300 RWHP if that's possible.


OK I have a different idea now give me a package deal on the intake and all the TBI stuff shipped to 97016 and I'll take it I'm thinking $325 pluss shipping. Sorry for rambleing.

 

Give ma a package deal on the intake and TBI stuff shipped to 97016.
Thanks
I wouldn't keep on this form but I don't know how to send a PM. Send me an email and we will take care of this I do have questions about the rest of your stuff.

 

I'll buy the intake, shoot me a pm.

 

Gmpp intake is sold. Still have all of the tbi parts, ecms, and the sfi set up.