[CA] tpi firehawk intake and aftermarket efi
06-03-2012, 03:10 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
tpi firehawk intake and aftermarket efi
better pics toward the bottom of the thread
i found this online this r the runners i have on this set up the AS&M
http://www.theformulasource.com/foru...hp/t13695.html
tpi top end for 350 throttle is a mono blade design.4 inc mass air flow sensor .harness is cut at one section .aftermarket ecu.runners are larger than stock.adjustable fuel regulator.pressure guage .fuel inlet and return have -AN fittings.ported plenum and runners.look at pics forr more thing i might haved missed
make me a decent offer ill let these go
Last edited by daniel92345z28; 06-08-2012 at 05:53 PM.
06-03-2012, 08:25 PM
#4
Supreme Member
iTrader: (2)
Join Date: Jul 2005
Location: Guilford, Connecticut
Posts: 1,428
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 IROC-Z camaro
Engine: 355 TPI
Transmission: tko 500
Axle/Gears: Dana 44 3.31 posi pbr brakes
Re: tpi firehawk intake and aftermarket efi
Does anyone have any info on that monoblade throttle body and the plenum? Ive never seen One like that. The runners look like they are either AS&M or TPIS. Base could be Accel or Edelbrock cant tell. Aftermarket computer tunable?
06-03-2012, 08:36 PM
#5
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
not too much info on the monoblade out there its a 1300cfm though
as for the ecu it has little **** and botton to adjust fuel in load,start up,cruising ,load ect. amd evrything for tpi seems to be port match perty good
as for the ecu it has little **** and botton to adjust fuel in load,start up,cruising ,load ect. amd evrything for tpi seems to be port match perty good
06-03-2012, 10:30 PM
#7
Junior Member
Join Date: Mar 2012
Location: Quad Cities, IA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro IROC-Z 5.7 TPI
Engine: 350 aka 5.7L Tuned Port Injection
Transmission: 700-R4
Axle/Gears: 3.27 posi
Re: tpi firehawk intake and aftermarket efi
how much for the runners? im in the quad cities, how far are you from here
Trending Topics
06-03-2012, 10:33 PM
#8
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
im selling the tpi complete i really dont want to split up .but if it wasnt complete i probally would sell in separete sections.
Last edited by daniel92345z28; 06-03-2012 at 10:53 PM.
06-04-2012, 12:13 AM
#9
Supreme Member
iTrader: (7)
Join Date: Nov 2006
Location: Alamogordo, NM
Posts: 3,740
Likes: 0
Received 9 Likes
on
9 Posts
Car: 88 Formula 350
Engine: 5.7
Transmission: T-56
Axle/Gears: 9" 3.89
Re: tpi firehawk intake and aftermarket efi
I too am interested in SLP dual intake setup. Can you PM me a price? Shipped to 95973?
06-04-2012, 01:57 AM
#10
Supreme Member
iTrader: (6)
Join Date: Dec 2008
Location: Norwalk, CA
Posts: 2,540
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
Re: tpi firehawk intake and aftermarket efi
Ill take the complete tpi for sure
Last edited by SiCkRs; 06-04-2012 at 02:11 AM.
06-04-2012, 09:09 PM
#11
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
i cleaned the parts up and measure some of the runners
Last edited by daniel92345z28; 06-04-2012 at 09:14 PM.
06-04-2012, 09:22 PM
#12
Supreme Member
iTrader: (2)
Join Date: Jul 2005
Location: Guilford, Connecticut
Posts: 1,428
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 IROC-Z camaro
Engine: 355 TPI
Transmission: tko 500
Axle/Gears: Dana 44 3.31 posi pbr brakes
Re: tpi firehawk intake and aftermarket efi
separate the fuel pressure gauge and hose?
06-04-2012, 09:27 PM
#13
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
sorry i can but dont want to.im sure who ever buys this is going to want that on their
06-04-2012, 11:47 PM
#14
Supreme Member
iTrader: (6)
Join Date: Dec 2008
Location: Norwalk, CA
Posts: 2,540
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
Re: tpi firehawk intake and aftermarket efi
edit
Last edited by SiCkRs; 06-05-2012 at 03:07 PM.
06-05-2012, 11:44 AM
#16
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
if i missed anyone sorry kinda hard to messeage back 30+ pm's
slp dual intake might be sold just need to get a shipping quote for him.
slp dual intake might be sold just need to get a shipping quote for him.
06-07-2012, 09:43 PM
#17
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
bump the hump
06-07-2012, 10:20 PM
#18
Member
iTrader: (2)
Join Date: Jan 2006
Location: Ettrick WI
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: tpi firehawk intake and aftermarket efi
whats the price on the tpi?
06-08-2012, 05:54 PM
#19
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
sorry guys gonna hold on to the slp dual cold air
Last edited by daniel92345z28; 06-08-2012 at 07:08 PM.
06-09-2012, 05:55 PM
#20
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
the other tpi stuff is still for sale.but not the slp dual cold air kit
thanks for looking
thanks for looking
06-09-2012, 10:01 PM
#21
Junior Member
iTrader: (5)
Join Date: Jan 2009
Location: Clearwater , Florida
Posts: 70
Likes: 0
Received 4 Likes
on
3 Posts
Car: '87 Vette C4
Engine: 400 + .040 = 409 ci
Transmission: 700R4 built
Axle/Gears: Dana 44 w/3.42's
Re: tpi firehawk intake and aftermarket efi
.......... Just an FYI ... Air Sensors originally designed the FIRST Fuel Injection Intake ... their name is still cast into the bottom of the base manifold ... they started making TBI EFI stuff shortly after OPEC formed in the late 70's ... this intake appears to use a factory base with some big tube runners ... the mono-blade TB is a rare piece ..........GLWS ........
06-09-2012, 10:10 PM
#22
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
thank you for the info C409
06-11-2012, 07:36 PM
#24
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
all pm's replied to
06-13-2012, 06:21 PM
#25
Supreme Member
iTrader: (26)
Join Date: Nov 2002
Location: Moneta, VA
Posts: 2,108
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 formula 350
Engine: ls1 magnuson tvs2300 supercharger
Transmission: T56
Axle/Gears: 4.11 Dana 44!
Re: tpi firehawk intake and aftermarket efi
what made you decide to keep the dual cold air? did you sale fall through? I'm still interested.
06-13-2012, 06:31 PM
#26
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
decided to use on another project car
06-15-2012, 11:33 AM
#28
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
bump
06-16-2012, 08:31 AM
#29
Re: tpi firehawk intake and aftermarket efi
WOW .... must be REALLY expensive .. there's not even enough room on this entire forum to fit the PRICE ... must be ALOT of zeros !!!
06-16-2012, 09:23 AM
#30
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
if by that you mean two zeros and a six in front of them then yes thats a lot of zeros
lol
lol
06-22-2012, 11:47 PM
#31
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
bump
06-25-2012, 08:48 PM
#32
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
bump
06-25-2012, 08:51 PM
#33
Supreme Member
iTrader: (26)
Join Date: Nov 2002
Location: Moneta, VA
Posts: 2,108
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 formula 350
Engine: ls1 magnuson tvs2300 supercharger
Transmission: T56
Axle/Gears: 4.11 Dana 44!
Re: tpi firehawk intake and aftermarket efi
let me know on that dual snorkel intake if you change your mind
07-01-2012, 10:41 PM
#34
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
tpi still for sale and still open to offers
bump
bump
07-06-2012, 03:56 PM
#35
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
slp twin cold air sold and shipped out.
now parting out the tpi set up make offer on the sepparate parts
monoblade throttle body is pending on payment.
now parting out the tpi set up make offer on the sepparate parts
monoblade throttle body is pending on payment.
07-06-2012, 04:17 PM
#36
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
will trade toward a lt1 clucht or performance parts or a lt1 t56 short shifter
07-06-2012, 08:11 PM
#38
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
there some already on here .or what angles were u looking for
07-06-2012, 08:14 PM
#39
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
woops price not pics im looking for 200 plus shipping
07-07-2012, 09:18 PM
#41
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
yeah i still have the as&m runners
07-12-2012, 10:51 PM
#42
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
runners,fuel rail and injectors ,pressure gauge ,adjustable fuel regulator .mono blade throttle body are sold.
plenum and base plate are still avilable
plenum and base plate are still avilable
07-13-2012, 05:47 PM
#43
Junior Member
Join Date: Oct 2011
Location: brighton tn
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: gunmetal 88 gta 98 yamaha vmax
Engine: l98
Transmission: 700r4
Axle/Gears: bw 9 bolt 327
Re: tpi firehawk intake and aftermarket efi
what about the fmu? still available? shipped to 38011?
07-13-2012, 09:50 PM
#44
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
what is the fmu
07-14-2012, 12:48 AM
#45
Junior Member
Join Date: Oct 2011
Location: brighton tn
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: gunmetal 88 gta 98 yamaha vmax
Engine: l98
Transmission: 700r4
Axle/Gears: bw 9 bolt 327
Re: tpi firehawk intake and aftermarket efi
the fuel management unit the box that controls the injection
07-14-2012, 08:55 AM
#46
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
yeah still have it shoot me an offer ecu and harness
07-27-2012, 12:17 PM
#47
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
sold almost everything just have the base manifold,plenum and ecu with harness
09-07-2012, 08:41 PM
#48
Supreme Member
iTrader: (2)
Join Date: Jul 2005
Location: Guilford, Connecticut
Posts: 1,428
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 IROC-Z camaro
Engine: 355 TPI
Transmission: tko 500
Axle/Gears: Dana 44 3.31 posi pbr brakes
Re: tpi firehawk intake and aftermarket efi
Who bought the fuel pressure gauge? Im just curious what brand it is. Looks pretty nice and id like one like it myself.
09-08-2012, 12:33 PM
#49
Junior Member
Thread Starter
Join Date: Aug 2009
Location: hesperia california 92345
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: tpi firehawk intake and aftermarket efi
sorry i would not know who makes it .it came with the whole tpi set up .
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM
beachrodder
Tech / General Engine
7
08-25-2015 08:05 AM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM
