Ok mav. Ill have it ready for you.

 

TTT

 

Payment sent for the EGR valve. Hoping this weekend to get everything mocked up so I know where to weld the EGR tube on the #2 primary.

 

ok mav. Ill get it in the mail tommorow afternoon.

 

hi im looking for 2 parts first being the original air filter housing and tube going to the intake and a battery tray for the drivers side i get paid this wed and would be able to send you money on that day if you have them please let me know

 

infact depending on your location in ohio i can most likely pick it up in person im in pittsburgh

 

I dont have the bat tray. I also dont have the original air filter can. But I do have all the piping for it (plastic stuff) and the tube for the PVC that your talking about.

I live over by Toledo

 

Bump bump

 

TTT

 

Bump.

 

TTT

 

Bump Bump

 

Still piles of parts for sale. TTT

 

Bump/ Just a little bit of the stuff i have laying arround

 

You got a working EGR solenoid?

 

I have 2 egr set ups but both sileniods have been sold. Sorry. The rest of the set ups are there though.

 

Oh well. I broke the vacuum part on mine, and Autozone, Discount, and the others don't carry it.

 

Just as well as the silenoids i had were not vaccum ones.

 

Bump bump. Still have a room full of parts.

 

Eddi, you wouldn't happen to have a MAP sensor bracket (the one that bolts to the cowl by the heater box), would you? I don't care if it's got the sensor or not (I have 3 of the things but nothing to mount them to).

RubberDucky, if you haven't found your EGR parts yet, I still have pretty much all of my 2.8 EGR stuff, if you're still looking.

 

Mav. Im 99.9% sure I do. Ill look asap in the morning and then pm you.

 

Hey eddi, i was wondering if you have the main fuel line rubber hose? I have a 3.1L fuel injected and 2 hoses on the driver side front of engine where the metal fuel line comes up and 2 rubber hoses feed the fuel into the engine.

One of my hoses has a hole (the shorter hose) and im in need of another, or both if you'l sell for a good deal.

 

ok i've tried contacting you multiple times when your online and i get no response from here or PM. Thanks but no thanks, i cant wait any longer so ill go with the ones from ebay.

 

All I have is a phone at work so its hard to do much let alone to run home and make sure I have the item for you. Works been crazy busy as always and most ppl do work days on the weekdays....lol. So ill not apploligize for that. I got back to you in less one day, and thats all you can exspect out of a person that works a 60 hr week. You tired contacting me ONE time this afternoon and I was working, I cant say I have a part if im not at home and avalible to look in the garage. I check TGO here and there on my breaks but I dont have to sell myself on why I cant run home to my garage for you.

Next time you have a issue with me id really appreciate it if you pm'ed me this stuff when you voice you opinion on my timely manor of business. You posted this stuff this morning for gods sake......

 

I didn't post what i said in an angry way lol, although re-reading it myself i do come off that way. haha my bad. What i meant by the post was that i just couldn't put it off any longer and am anxious to fix my gas leak before i start my new job in a week and a half. I drove my car today about 40 miles and it took 6 1/2 gallons of gas to get there and back (half a tank of gas) and i was quite angry with it lol. I have electric tape holding the hole but judging by the gas mileage i got (like 6 1/2 miles a gallon) it isnt working or i have another horrible leak somewhere.

 

I need an emisson harness from a 3.1 L throttle body. 90 91 or 92 model firebird 72104 is the ZIP

 

For what emmisions part?? IE egr, AIR system...exc

 

It is for the air system and it comes out of the throttle body, it looks like this http://imgur.com/7G2NHHg

 

Heck yea I got one of those. Shipping wont be much hows 15 bucks sound shipped to your door?? I get home from work arround 4:30 eastern time. Ill take a pic and link if for you also.

 

EDIT: If I can fit that adapter into a small envelope how about 10 bucks shipped to your door? Ill make sure of it when I get back from work

 

Hey I'm looking for a few parts

3.1 engine harness. ( Firewall foward)

Complete passanger side exhaust manifold (with studs & nuts for egr valve)

A rear only 2 stripe 16 inch iroc wheel

A driver side dash vent for ac in the dash

I have paypal and can send it out next thursday

Please send pics to redblaze332004@yahoo.com

 

I have the exhaust manifold you need for the pass side. I believe the egr the threads /bolts/exc. are intact and ok. I have two full sets so asap in the morning I will get them out and look them over for you. Then post up. Id like 15 bucks for the manifold(my time and effort). Im not sure what shipping will set ya back. Ill weigh the manifold also and see what that will be.

I dont have any of those other items though, sorry.

 

This item is sold. Thanks

 

I have the ex manifold with a egr block off plate on it?? Is that ok It can be taken off and yours attatched. Let me know. I was out all day racing so ill take a pic tommorow morning if you want and send it to ya. Just let me know.

 

That's cool sounds good ! A pic is fine !
Whenever u get time !
Just let me know
How much shipping is to 32301 thanks again

 

Here's a picture of the manifold. The threads are all good. I've looked at ups and usps. The shipping is 17.60 though Ups. Ill sell the part for 35bucks total shipped to your door. I really didnt relize they weighed 8lbs! Though they were a lot more to be honest. You might wana repaint it with a few coats of VHT heat paint. There still some rtv gasket stuff on there.






Do you need any of the egr stuff at all?? I dont have the silenoids anymore but I have the rest of the stuff. 2 sets of it. I also think I have some stock manifold gaskets in the garage. If I can find them i'll toss them in there for free, since I have no use for them.

Let me know what ya think. Thanks

 

I really need to go though the shop but as you can see i litlery have a room of spare parts that ill probly never need. There are a few items that I cant part with, but most of the stuff Id like to get rid of.

 

Don't really need anything unless u have the small oval metal gaskets that go between
Both ends of the flexable metal tube that start & the in take & the leads to the egr ex extention ? Shoot me ur paypal & ill shoot u that thursday morning ! Thanks again !

 

Sent ya a pm.

 

how much for timing cover w/timing tab? shipped to 88240

 

30 bucks shipped to your door.

 

You wouldn't happen to have a power steering pulley, would you? If you do, could you measure how far it is between the end of the shaft and the lip at the edge of the pulley (offset)? If my late model pulley doesn't match, I might be looking to buy the pulley.

Also, you wouldn't happen to have any air intake clamps that are somewhere in the ballpark of 3.75", would you? One of mine has gone AWOL.

 

I do have a extra PS set up. Ill measure it after work and see what the offset is.

I think I have one of those intake clamps. Ill check for that after work also.

 

@ Mav, Ive got one of those clamps and the offset that i measured is 13/16th. Thats from the end of the shaft to the lip of the pulley. Does that sound right. I may be measuring the wrong area.

 

You got an upper air box lid?

 

I don't need the clamp... My neighbor happened to have one in his collection of crap.

I may or may not be good on the pulley. I think I have an 1/8" offset between the crank and the rest for some reason (I do know I have to space out the alternator bracket), and that might be enough to use the 3100 pulley. I'll measure it tomorrow and let you know.

Also, on those connectors, you were looking for 3.1 specific ones? I need to make a junkyard run (stupid 3100 ignition module doesn't work and it's WAAAY too late to get my money back so I need to get one), and I can pull them out of the 93 I got the dash from or one of the 2.8 cars that are there if I don't have any already. I'll double check on the IAC and TPS, but I already know I don't have any IAT connectors (already got rid of the last one) and I don't have any CTS connectors on hand (been using modified IAT connectors).

 

I got all the connectors I needed except the IAT one. Seems that on is a harder one to find and I really dont wana pay 20 bucks for on off ebay..lol

 

I'll snag one when I get to the J/Y. There are 2 3rd and at least 1 4th gens that have the IAT connector, and I know the engine stuff for the maroon Bird is pretty much complete. Although I'll probably just cut it off of the harness in the 93 I'll be getting the ignition coil assembly from. I'll go Monday or Tuesday, when it's warmer, so I hopefully won't break the retaining tab .

 

Ok mav. Have fun out at the j/y. Let me know if ya find a IAT connect. I really appreciate it.


Let me know of you ever need any more stuff outta my pile of stuff.

 

How much for the power steering pulley? The junkyard crushed pretty much everything in terms of F-bodies!

I got the IAT connector for you. It's the later model style with the little wires, but it's still the same connector.