Everything is plus shipping from 44094 obo, so feel free to ask.


$1200 Precision Turbo PT91.5 g-trim with 1.0a/r, 1/8" npt oil inlet and 5/8" drain both attached
$200 1.5a/r housing
$25 T5 to 3.5" pipe flange
$40 5" v-band with dual 3.5" outlets
$300 Procharger BOV
$350 Tial 60mm wastegate
$175 SDCE carb hat/bonnet with internal velocity stack
$500 w/a intercooler made with a Bell core (core dimentions roughly 12x12x6)
$100 Rule 3700 water pump
$100 aluminum water tank with 1.5" in/out
$300 105mm wilson throttle body
$80 tall throttle body to 4150 4" elbow (multiple orientations)
$80 short throttle body to 4150 4" elbow (infinite orientations)

I had some aluminum ducting that touched the compressor once, but the damage is only cosmetic and I was successfully using it as you see it.