I dont have any pics of the stuff yet but I have pulled it all off. The intake is complete with the fuel rail kit, and BBK 58mm TB. It still has all the GM sensors. Everything is in pretty good shape. All it needs is the gaskets that go between the upper and lower. The TB and a little bit on the intake is scratched on top from where is rubbed on the hood of my Trans Am. Also I have some Ford 30 lb injectors that have been bumped to 50s that I will throw in with it but needs new O-rings. The MSD billet distributor works great has a little bit of corrosion but hasnt had any problems. Its the GM remote coil HEI unit. Needs a new cap and rotor but stock GM stuff works fine so you dont have to buy MSD stuff. The MS2 3.0 is programmed and wired for this setup but will need a little fine tuning for your setup. When I removed it all from the truck I had to leave some of the wiring so it wouldnt be a direct install. I got all the stuff for it from DIY Auto Tune's web site. The harness is there pre-made setup. It controlled the timing and fuel. I will include the stimulator as well. All this stuff came off my truck that was running as of August 5 2013. I drove it to the guys house I sold it to and removed all this stuff. Also have an Innovate LC-1 that has worked great for me(I know people have problems with them). The O2 sensor is about 2 weeks old and might have 200 miles on it and was working awesome when I pulled it off. Like I said I will upload some photos when I get a chance. I would like to get $1000.00 for the entire setup. The truck ran pretty well with this setup. Mid 14s in the quarter. I never got the tune perfect since I am no tuner but I drove it for 2 years and never had any problems with this setup. I will separate this stuff but I want to wait a little and see if it sells together first. Shipping and Paypal I will work out a deal with the buyer at time of sell.

 

i would like the intake setup with injectors. Maybe the distributor too!

 

How fast you want it? I was kinda wanting to sell it as a whole setup but if it doesnt sell here soon I will part it out.

 

today. How much

 

To sell the intake and distributor I think i would have to get $650 plus shipping and Paypal. It comes with one of those fancy K&N filters on the TB also I forgot to mention that.

 

how much for the fuel rails?

 

The price list if I separate- Prices are firm and i believe fair plus shipping and paypal fees:

Intake, fuel rails, Injectors $350
BBK 58mm TB $150
MSD distributor $150
Mega Squirt 2 w/ Harness $300
Innovate LC1 $100

 

Are the intake fuel, rails, and injectors still for sale? I would be very interested in them. Also Is the intake for vortech heads?

 

I'll take the intake, rails, and injectors for $350 PM please

 

I believe the intake, fuel rails and injectors sold last night. Still waiting on money though so I will keep you guys posted. Still have the TB and all the other stuff.

 

got pic of the lc1?

 

Interested in LC1.
how much shipped to 71047?

thanks, greg

 

I believe the MS2 and LC1 sold today. Waiting on the cash. Intake Fuel Rails and Injectors are sold. Thanks Third Gen.

 

Still have the 58mm BBK Throttle body complete with IAC and TPS for 88 style throttle cable and an MSD distributor for the same model. Small cap 8 pin control module. Will take 150 for either both work good at time of removal earlier in August. Will try and post pics of them here in a little bit.

 

I cant get images to work for some reason. Will try tomorrow.