355 TPI Engine for Sale
#1
Member
Thread Starter
Join Date: Jul 2006
Location: Cary, NC
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 420 EFI
Transmission: TKO500
Axle/Gears: Moser 9" 3:50
355 TPI Engine for Sale
Hi,
I am selling my present 355 TPI Engine.
Roughly 10K miles on the motor. Not a daily driver.
GM Late Model Block, Crank, and Rods.
ATI Balancer.
TRW Forged Pistons.
Custom Comp XFI (218/224 @ 0.050, 111 LSA) Cam.
AFR190 Ported Heads with Comp 1.6 Roller Rockers and Polylocks.
TPIS Big Mouth Baseplate.
TPIS Runners.
Ported GM Plenum.
52mm GM Throttle Body.
Location : NC.
Please send me a PM if you are interested.
Best Regards,
Bruce
I am selling my present 355 TPI Engine.
Roughly 10K miles on the motor. Not a daily driver.
GM Late Model Block, Crank, and Rods.
ATI Balancer.
TRW Forged Pistons.
Custom Comp XFI (218/224 @ 0.050, 111 LSA) Cam.
AFR190 Ported Heads with Comp 1.6 Roller Rockers and Polylocks.
TPIS Big Mouth Baseplate.
TPIS Runners.
Ported GM Plenum.
52mm GM Throttle Body.
Location : NC.
Please send me a PM if you are interested.
Best Regards,
Bruce
#2
Member
iTrader: (4)
Join Date: Oct 2009
Location: California
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 CHEVY IROC-Z28
Engine: 355 Built/High Performance
Transmission: 700R4 Swap For T56
Axle/Gears: 3.73 Posi
Re: 355 TPI Engine for Sale
Hi,
I am selling my present 355 TPI Engine.
Roughly 10K miles on the motor. Not a daily driver.
GM Late Model Block, Crank, and Rods.
ATI Balancer.
TRW Forged Pistons.
Custom Comp XFI (218/224 @ 0.050, 111 LSA) Cam.
AFR190 Ported Heads with Comp 1.6 Roller Rockers and Polylocks.
TPIS Big Mouth Baseplate.
TPIS Runners.
Ported GM Plenum.
52mm GM Throttle Body.
Location : NC.
Please send me a PM if you are interested.
Best Regards,
Bruce
I am selling my present 355 TPI Engine.
Roughly 10K miles on the motor. Not a daily driver.
GM Late Model Block, Crank, and Rods.
ATI Balancer.
TRW Forged Pistons.
Custom Comp XFI (218/224 @ 0.050, 111 LSA) Cam.
AFR190 Ported Heads with Comp 1.6 Roller Rockers and Polylocks.
TPIS Big Mouth Baseplate.
TPIS Runners.
Ported GM Plenum.
52mm GM Throttle Body.
Location : NC.
Please send me a PM if you are interested.
Best Regards,
Bruce
how much for everything and also would u consider parting out?
#3
Member
Thread Starter
Join Date: Jul 2006
Location: Cary, NC
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 420 EFI
Transmission: TKO500
Axle/Gears: Moser 9" 3:50
Re: 355 TPI Engine for Sale
Hi,
I would rather sell the whole motor.
It runs fine and is presently in the car. Replacing this motor with a 420 CI EFI SBC.
Forgot to mention in the original post that the Fuel Rails, Adjustable Fuel Pressure Regulator, and 24 Lb/Hr Bosch III Fuel Injectors are included.
Also, the engine has been balanced to 1/2 gram.
Would prefer to handle pricing negotiations on PM.
Please send me a PM and we can discuss the pricing.
A low resolution picture is attached.
Thanks for the interest.
Best Regards,
Bruce
I would rather sell the whole motor.
It runs fine and is presently in the car. Replacing this motor with a 420 CI EFI SBC.
Forgot to mention in the original post that the Fuel Rails, Adjustable Fuel Pressure Regulator, and 24 Lb/Hr Bosch III Fuel Injectors are included.
Also, the engine has been balanced to 1/2 gram.
Would prefer to handle pricing negotiations on PM.
Please send me a PM and we can discuss the pricing.
A low resolution picture is attached.
Thanks for the interest.
Best Regards,
Bruce
#4
Member
Thread Starter
Join Date: Jul 2006
Location: Cary, NC
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 420 EFI
Transmission: TKO500
Axle/Gears: Moser 9" 3:50
Re: 355 TPI Engine for Sale
Hi Guys,
The asking price is $3750.00 USD.
The price is negotiable.
For the average builder, it would be hard to machine/rebuild a used L98 and buy the aftermarket "extras" for $3750.00 USD.
The $32B Tune is part of the sale.
Best Regards,
Bruce
The asking price is $3750.00 USD.
The price is negotiable.
For the average builder, it would be hard to machine/rebuild a used L98 and buy the aftermarket "extras" for $3750.00 USD.
The $32B Tune is part of the sale.
Best Regards,
Bruce
Hi,
I would rather sell the whole motor.
It runs fine and is presently in the car. Replacing this motor with a 420 CI EFI SBC.
Forgot to mention in the original post that the Fuel Rails, Adjustable Fuel Pressure Regulator, and 24 Lb/Hr Bosch III Fuel Injectors are included.
Also, the engine has been balanced to 1/2 gram.
Would prefer to handle pricing negotiations on PM.
Please send me a PM and we can discuss the pricing.
A low resolution picture is attached.
Thanks for the interest.
Best Regards,
Bruce
I would rather sell the whole motor.
It runs fine and is presently in the car. Replacing this motor with a 420 CI EFI SBC.
Forgot to mention in the original post that the Fuel Rails, Adjustable Fuel Pressure Regulator, and 24 Lb/Hr Bosch III Fuel Injectors are included.
Also, the engine has been balanced to 1/2 gram.
Would prefer to handle pricing negotiations on PM.
Please send me a PM and we can discuss the pricing.
A low resolution picture is attached.
Thanks for the interest.
Best Regards,
Bruce
Thread
Thread Starter
Forum
Replies
Last Post
The_Phoenix
Engine/Drivetrain/Suspension Parts for Sale
7
09-03-2015 10:56 PM
R3500
Engine/Drivetrain/Suspension Wanted
1
08-17-2015 12:16 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM