[OH] Mild Performance Parts
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2012
Location: Norwalk, Ohio
Posts: 604
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Firebird Formula
Engine: 385
Transmission: Full Manual TH350
Axle/Gears: Moser 9" 3.70
Mild Performance Parts
Putting up for a sale a bunch of my mild/moderate performance parts, I've stepped up my game a bit. Swapped to a carb setup because the car is 99% bracket raced, and the fuel injection didn't have the consistency I was looking for. All items are shipped at buyers expense. Everything will be shipped through cheapest shipping route, which most of the time is USPS. I'll be happy to upload more pics upon request.
![](https://img12.imageshack.us/img12/1107/8jdn.jpg)
Shorty headers, Hooker 2055s + Summit 3" cutout, O2 Bung welded in the y-pipe. Built this to bolt right up in place of stock manifolds, y-pipe, and catalytic converter. Bought June of 2012, pulled off the car November of 2012 in favor of longtubes. 1 AIR tube is broken off, other 7 are intact. $480+shipping.
![](https://img89.imageshack.us/img89/7320/2ve5.jpg)
BBK 58mm Throttle Body. Paid $225 used from TunedPerformance and never installed. $225+shipping.
![](https://img547.imageshack.us/img547/1984/wsdc.jpg)
Bosch III 36lb injectors from SouthBay, includes O-rings. Used for engine break-in and a handful of passes at the track before going carbed. $175+shipping.
![](https://img809.imageshack.us/img809/151/acf1.jpg)
30lb injectors, claimed to be from a Bonneville SSC. Paid $40 used from a member on here, but I never used them. Planned on a 350 build, plans changed and I went stroker. Didn't think 30lb would be enough for my power level, so upgraded to the above 36lb injectors. 2 have broken plastic tips, don't know if that affects their performance or not. $30+shipping.
![](https://img201.imageshack.us/img201/646/1tat.jpg)
Adjustable fuel pressure regulator, bought new off Ebay, never installed. Includes 0-100 psi gauge and a handful of fittings it came with. $40+shipping
![](https://img266.imageshack.us/img266/569/ki53.jpg)
Firebird cold air intake, bought new off Ebay, mocked up but never run. I have both red and blue couplers and filter. $40+shipping.
![](https://img809.imageshack.us/img809/5518/4p74.jpg)
7730 ECM, bought from TunedPerformance, never got around to repinning my 165 harness. $60+shipping.
![](https://img12.imageshack.us/img12/1107/8jdn.jpg)
Shorty headers, Hooker 2055s + Summit 3" cutout, O2 Bung welded in the y-pipe. Built this to bolt right up in place of stock manifolds, y-pipe, and catalytic converter. Bought June of 2012, pulled off the car November of 2012 in favor of longtubes. 1 AIR tube is broken off, other 7 are intact. $480+shipping.
![](https://img89.imageshack.us/img89/7320/2ve5.jpg)
BBK 58mm Throttle Body. Paid $225 used from TunedPerformance and never installed. $225+shipping.
![](https://img547.imageshack.us/img547/1984/wsdc.jpg)
Bosch III 36lb injectors from SouthBay, includes O-rings. Used for engine break-in and a handful of passes at the track before going carbed. $175+shipping.
![](https://img809.imageshack.us/img809/151/acf1.jpg)
30lb injectors, claimed to be from a Bonneville SSC. Paid $40 used from a member on here, but I never used them. Planned on a 350 build, plans changed and I went stroker. Didn't think 30lb would be enough for my power level, so upgraded to the above 36lb injectors. 2 have broken plastic tips, don't know if that affects their performance or not. $30+shipping.
![](https://img201.imageshack.us/img201/646/1tat.jpg)
Adjustable fuel pressure regulator, bought new off Ebay, never installed. Includes 0-100 psi gauge and a handful of fittings it came with. $40+shipping
![](https://img266.imageshack.us/img266/569/ki53.jpg)
Firebird cold air intake, bought new off Ebay, mocked up but never run. I have both red and blue couplers and filter. $40+shipping.
![](https://img809.imageshack.us/img809/5518/4p74.jpg)
7730 ECM, bought from TunedPerformance, never got around to repinning my 165 harness. $60+shipping.
Last edited by PhoenixFirebird; 11-03-2013 at 10:29 PM.
#3
Junior Member
Join Date: Apr 2012
Location: ohio
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 z28 t top
Engine: 406 dead, now 383hsr
Transmission: t5/ saving for tko
Axle/Gears: 373
Re: Mild Performance Parts
How much for the intake shipped to 44256 which is medina Oh
Trending Topics
#8
Senior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2012
Location: Norwalk, Ohio
Posts: 604
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Firebird Formula
Engine: 385
Transmission: Full Manual TH350
Axle/Gears: Moser 9" 3.70
Re: Mild Performance Parts
Bump! Thank you to all the veterans out there, past, present, and future!
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM