Half of LS1 bigbrakeupgrade!!
#1
Member
Thread Starter
Join Date: Mar 2014
Location: Oregon
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Car: RS Camaro
Engine: 97 L31 350:Eventually a stroker
Transmission: WC T-5
Axle/Gears: Zexel Torsen 3.73s
Half of LS1 bigbrakeupgrade!!
Hey guys. From the Pacific Northwest here. Portland Oregon. I have the calipers with drilled and slotted rotirs and pads, it came off a 2000 WS6. Low miles id say less than 2k. The set up is just dirtyy and the rotors and pads look very new just has some surface rust. I was going to do the swap but found a cheap set of C5 vett rotors calipers brackets and rotors to go with instead. Im asking 150 for all of that since they sre low mileage, shoot me a text or email. font be afraid to majevan offer all i can say is no.Need to sell. I will send pics upon request as ill try and upload a couple here in just a few. I can ship but at buyer expense.
5413409876
mjbansch@gmail.com
5413409876
mjbansch@gmail.com
Last edited by Mr.ChevyStroker; 01-20-2015 at 06:00 PM.
#2
Member
iTrader: (10)
Join Date: Mar 2007
Location: Dearborn Hgths Mich
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc Z 28
Engine: 355/ 600 Holly
Transmission: 700R4 shift kit & vette servo
Axle/Gears: 9 bolt 3;70s
Re: Half of LS1 bigbrakeupgrade!!
what needs to be changed to bolt them on a 87 Iroc.
#3
Member
Thread Starter
Join Date: Mar 2014
Location: Oregon
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Car: RS Camaro
Engine: 97 L31 350:Eventually a stroker
Transmission: WC T-5
Axle/Gears: Zexel Torsen 3.73s
Re: Half of LS1 bigbrakeupgrade!!
The spindles will need to be modified and you will need custom hubs, and the mounting brackets from bigbrakeupgrade.com.
If you go to that site and click ls1 link link there's a full kit, and partial kit which is what you'd need. And then if you want the modifications he sells parts separately
If you go to that site and click ls1 link link there's a full kit, and partial kit which is what you'd need. And then if you want the modifications he sells parts separately
#4
Member
Thread Starter
Join Date: Mar 2014
Location: Oregon
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Car: RS Camaro
Engine: 97 L31 350:Eventually a stroker
Transmission: WC T-5
Axle/Gears: Zexel Torsen 3.73s
Re: Half of LS1 bigbrakeupgrade!!
Since this is half of the kit unless you want to do all of the modifications yourself the partial kit is what you need. All you have to do is send your old spindles in and he'll clean them and set them up for the front brakes.
#5
Member
Thread Starter
Join Date: Mar 2014
Location: Oregon
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Car: RS Camaro
Engine: 97 L31 350:Eventually a stroker
Transmission: WC T-5
Axle/Gears: Zexel Torsen 3.73s
Re: Half of LS1 bigbrakeupgrade!!
Bump people!! Need to get rid of em! They are boxed up now! Shoot an offer!
Thread
Thread Starter
Forum
Replies
Last Post