[CT] Edelbrock Carb, MSD ProBillet, Stage II Intake
#1
Junior Member
Thread Starter
Join Date: Dec 2014
Location: Portland, CT
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Z28
Engine: 355 Doorstop
Transmission: T-5
[CT] Edelbrock Carb, MSD ProBillet, Stage II Intake
Hey guys,
I'm restoring my Camaro, and selling of some of the go fast parts that I pulled from it to fund the project. They aren't really my style, but I'd like to see them go to good use. All parts seem like they are almost new, but I've never seen them in action, so they're going cheap.
First off, we have an MSD ProBillet HEI Distributor, part #85551. It is a little dusty from sitting, but it looks like it's in great shape.
SOLD
Next up is an Edelbrock Performer Series 750cfm carburetor, part #1407. I don't think this has ever even been rebuilt before, as the brass still all looks new, even the internal parts.
SOLD
Finally, we have a Summit Racing intake Manifold, part #SUM-226014. It is a dual plane intake, square flange, 1500 to 6500 RPM sweet spot for Perimeter bolt cylinder heads. It looks new, I hardly even cleaned it up. $50 and shipping and it's yours.
Also for sale is this Holley Street Mechanical Fuel Pump. Part #12-834 on Summit. It flows 80gph with a max psi of 7.5. It could use a polishing.
$40 takes it.
If you have any questions, want to trade something, or if I made a mistake, shoot me a PM.
Last edited by sreZ28; 10-22-2015 at 08:40 AM.
#3
Member
iTrader: (5)
Join Date: Aug 2006
Location: Stafford, Connecticut
Posts: 311
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Iroc
Engine: modified 350
Transmission: high performance built 700R4
Axle/Gears: Strange S60 3:73
Re: [CT] Edelbrock Carb, MSD ProBillet, Stage II Intake
What size are the ports on the intake.Would they fit 220 cc head ports?Thanks
#4
Junior Member
Thread Starter
Join Date: Dec 2014
Location: Portland, CT
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Z28
Engine: 355 Doorstop
Transmission: T-5
Re: [CT] Edelbrock Carb, MSD ProBillet, Stage II Intake
List Updated. The Intake Manifold is still for sale if anyone is interested.
#5
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,724
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: [CT] Edelbrock Carb, MSD ProBillet, Stage II Intake
http://www.summitracing.com/parts/su...make/chevrolet
He goofed the part number, is 014 nor 041.
I'm not aware of any dual plane manifold other than the composite one afr sells that will seal a 1206 or 1207 port.
-- Joe
#6
Junior Member
Thread Starter
Join Date: Dec 2014
Location: Portland, CT
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Z28
Engine: 355 Doorstop
Transmission: T-5
Re: [CT] Edelbrock Carb, MSD ProBillet, Stage II Intake
No, it's actually smaller than a 1205 port:
http://www.summitracing.com/parts/su...make/chevrolet
He goofed the part number, is 014 nor 041.
I'm not aware of any dual plane manifold other than the composite one afr sells that will seal a 1206 or 1207 port.
-- Joe
http://www.summitracing.com/parts/su...make/chevrolet
He goofed the part number, is 014 nor 041.
I'm not aware of any dual plane manifold other than the composite one afr sells that will seal a 1206 or 1207 port.
-- Joe
Thread
Thread Starter
Forum
Replies
Last Post
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
11-10-2015 06:17 AM
BlackphantomZ28
Engine/Drivetrain/Suspension Parts for Sale
0
08-22-2015 01:00 PM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM