[NY] Patriot Performance SBC Aluminum Heads
#1
Junior Member
Thread Starter
Join Date: Oct 2010
Location: Queens,NYC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: Patriot Performance 383 500hp
Transmission: T-56
Axle/Gears: Dana 44 4.09's
Patriot Performance SBC Aluminum Heads
Selling my old Patriot Performance Aluminum Heads.
This is an old link with the specs of the heads.
https://www.summitracing.com/parts/par-2169
Combustion Chamber Volume (cc):64cc
Intake Runner Volume (cc):185cc
Exhaust Runner Volume (cc):62cc
Came off my 383ci motor, ran them for about 5 years with no overheating. Car was an animal with them. Estimated 15k~ miles.
However they will need to be gone through, i did have blue smoke on hard acceleration which went away when these were replaced. So i suspect they need valve seals replaced at the minimum.
Great deal here for somebody!
$400 shipped OBO to most of the east coast, if you're on the west coast or mid-US we'll work out a shipping price.
Heads are located in Queens,NY 11385.
This is an old link with the specs of the heads.
https://www.summitracing.com/parts/par-2169
Combustion Chamber Volume (cc):64cc
Intake Runner Volume (cc):185cc
Exhaust Runner Volume (cc):62cc
Came off my 383ci motor, ran them for about 5 years with no overheating. Car was an animal with them. Estimated 15k~ miles.
However they will need to be gone through, i did have blue smoke on hard acceleration which went away when these were replaced. So i suspect they need valve seals replaced at the minimum.
Great deal here for somebody!
$400 shipped OBO to most of the east coast, if you're on the west coast or mid-US we'll work out a shipping price.
Heads are located in Queens,NY 11385.
Last edited by unseenT/A; 05-22-2017 at 11:50 AM.
#2
Junior Member
Thread Starter
Join Date: Oct 2010
Location: Queens,NYC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: Patriot Performance 383 500hp
Transmission: T-56
Axle/Gears: Dana 44 4.09's
Re: Patriot Performance SBC Aluminum Heads
Bump, price is neg. If interested shoot me an offer.
#4
Member
Join Date: Aug 2006
Location: indiana
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z-28
Engine: 355 small block XR276HR roller cam
Transmission: TCI built 700r4 2000 lockup stall
Axle/Gears: moser axels auburn posi 3:73 gears
Re: Patriot Performance SBC Aluminum Heads
just had a set redone 500 bucks to the machine shop so you are abit high on price given the cost of a new set. guides seals and 3 angle valve job and surfaced is what I had done.
#5
Junior Member
Thread Starter
Join Date: Oct 2010
Location: Queens,NYC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: Patriot Performance 383 500hp
Transmission: T-56
Axle/Gears: Dana 44 4.09's
Re: Patriot Performance SBC Aluminum Heads
This is true, i'll drop the price. $400 OBO Bump!!
#6
Junior Member
Thread Starter
Join Date: Oct 2010
Location: Queens,NYC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: Patriot Performance 383 500hp
Transmission: T-56
Axle/Gears: Dana 44 4.09's
Re: Patriot Performance SBC Aluminum Heads
Sold! ty all