I am selling a set of Trick Flow Kenny Duttweiler heads off my forged SBC.
They were on my car for about 5,000 miles.
I have the forged long block for sale as well. Only 50 miles on that.
Roller rockers and hydrolic roller lifters for sale as well.
As for the heads they are all packed up and ready to go out the door.
They were still covered in break in oil from the last build up.
They will need a good cleaning before use.

There are 1/2" coolant ports on these heads. Stock feature.
I had them plugged. I tried removing one of the plugs (summit part) and the hex head stripped so I drilled it out and managed to pull the plug out with an easy out. No damage to the heads at all. Just wanted to point that out since there may be some shavings on the heads from the drilling. Hard to clean it all off with them being oily.

I have the heads doubled boxed for protection during shipping.
Box weight is 65lbs. Size: 26"x16"x11". I am located in 01757. Should be enough for you to calculate shipping.
Anyways, here are the pics on the motor and some off the motor, plus documentation that came with the heads.








Please note if you need additional photos, that is OK, but it will be a paint to take them, so only request them if you are serious about making an offer please.

Thanks!

 

Sold!