When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am selling a complete factory HVAC that was removed from my 1992 B4C RS by Vintage Air in San Antonio. They used the car to R&D the Gen 5 Sure Fit system they will be releasing in 2023. (I will share photos of the new system in the discussion board.)
The AC system was last serviced and leak-tested in July 2021. It was functioning since then to the time it was removed, but I had the opportunity to work with VA on the new system. Naturally, I took it.
VA did not damage anything in the old system. Included is heat and AC boxes with cores, AC and heater hoses, heater valve, vacuum lines, compressor pump bolts, a relay, some wiring, etc. Condenser fins could use a comb and the boxes could use new foam gaskets (they're intact, but 30 years old). There is no damage to any parts except for the area of the EVAP box that is patched near the headers. The patched area is actually quite small. Additional tape was added as a heat shield. This area is not visible when installed. See photos.
No compressor bracket or ducting from in the dashboard.
$200 for all. Send me a PM. I'm in San Marcos, TX. Sorry no shipping.
actuators intact
could use some new foam heater core evap box patched with aluminum tape near headers control panel control panel control panel cable end wires & heater hoses + one relay.
Last edited by WesPoirier; Jan 6, 2023 at 09:24 PM.
Reason: sold
