driveshaft

Reply Subscribe

Thread Tools

Search this Thread

Jul 23, 2006 | 03:47 PM

steve87iroc

Thread Starter

Member

iTrader: (1)

Joined: Jul 2004

Posts: 368

Likes: 0

From: sandusky

Car: 1987 iroc z

Engine: 355 dart platinum 215cc heads

Transmission: <<BLOWN UP TH400>>

Axle/Gears: 10 bolt 4.11's

driveshaft

i need a drive shaft from a 82-83 camaro with the 200r4 trans thanks. also need a fan from a 87 tpi camaro with the dual fan setup one of the motors died in mine. looking for some drag slicks to let me me know what you have for a 15" rim 8" wide

Last edited by steve87iroc; Jul 23, 2006 at 03:50 PM.

Jul 24, 2006 | 09:03 PM

michianafbody

Junior Member

Joined: May 2006

Posts: 22

Likes: 0

hi I have one from a 89 GTA with 700R4 dont know if it will work or not?

Jul 24, 2006 | 10:20 PM

steve87iroc

Thread Starter

Member

iTrader: (1)

Joined: Jul 2004

Posts: 368

Likes: 0

From: sandusky

Car: 1987 iroc z

Engine: 355 dart platinum 215cc heads

Transmission: <<BLOWN UP TH400>>

Axle/Gears: 10 bolt 4.11's

i dont think it will beacuse im puting a turbo 400 in my car and need the shorter driveshaft.

Jul 24, 2006 | 10:28 PM

Randy82WS7

Supreme Member

Joined: Mar 2002

Posts: 4,812

Likes: 0

From: 62656

Car: 1991 S10 pickup 2700lbs

Engine: 4.3L Z TBI

Transmission: 700R4

Axle/Gears: 3.08 7.625"

nope it wont, he needs the shorter driveshaft than the 700r4 and 83 1/2 up ones

and even so you have to watch what length 400 trand you have, there were different lengths of them also

good luck