Looking for a 350 engine ('87-'92 roller with one piece rear main seal) for my '89 Camaro. I have a 350 block, but no crank, pistons, or heads. I may consider a 305 since that is what is in the car now, but it is no good. I'm located in NJ.

 

I have an l98 for rebuild complete heads to pan-$100
or an l98 complete from heads to pan rebuilt with 15k on it-$400

 

What is you zip code? Does the one that needs a rebuild have a spun bearing or it just needs a rebuild? What year are the L98's?
Rich

 

hey if you interested i have a 350 out of 92 caprice- with about 64,000 miles on it. If you're interested call me at 1-484-695-6303 i'm located in the pocono's about 15 minutes from route 80. ask for art

 

I have a carbed 350 from a 87z with 8K miles $600.I am in Chester MD 21619

 

In Tampa,FL. 89 Pontiac Firebird 5.0/305 centerbolt valvecover style, Runs perfect still in car, With recent head job done. Get someone here to here it, I'll pull it out and shipped to your Newark area $375.00

 

I have an '88 305 (roller with one piece rear main seal) complete except for the intake. It ran well before I removed it. I took it out of a Camaro my son bought to put the engine from his wrecked Trans Am into.
I'm in NJ.
Let me know,
Frank
rileystudio@hotmail.com

 

i have a 305 from a 88 iroc ran great.when pulled will run great when u get it i live in md

 

im in north nj if u still looking i have 88 gta 350tpi with a 5spd guy i bought it from did alotta work to it only has 30000 on rebuilt motor and trans. rear included . all wire harness are there uncut. has wireing for digital dash computer included can hear run.1000 takes whole car.

 

I have a 305 complete motor, for 150 in va beach, came out of a 92 camaro rs, last summer ran when pulled

 

i have a 350 tpi with the original automatic transmission at 62000 for both. i have big mouth lower intake and edelbrock cylinder heads.i had an 87 iroc but i just kept the engine.