Im looking for a whole setup so I can do a swap for my car. Its an '87. Im located in Massachusetts so closer is always better but will entertain any distance if it s agood deal! Thanks!

-Jesse

 

I have a t-5. But you say a set-up. i am still using my old bell. r u switching from an auto.?

 

yea, switching form auto. want to do a swap all at once so Im trying to get the housing, pedals etc. all at once if I can

 

Don't blame u for that. But if u do end up w/everything but the trans send me a message. my old t-5 is in good shape.

 

I bought the swap kit from hawks..not going to use it now. Still in the boxes...let me know

 

I have One, but its not going to be cheap..

T5 (non Worldclass) (v8) Pulled it apart to rebuild it, Came to find out someones already rebuilt it, looks new inside, even had fresh Oil. so I ended up putting it Back Together With all new seals, *ASE master tech*

has bellhousing, I have the Pedals, and the complete slave/master cylinders, BUT the slave cylinder needs to be replaced, it was a Cheap autozone one, didnt hold up, I also have a MINT T5 Shifter plate 90-92 Style with New Boot,

I Also Have a Brand new Pro 5.0 Shifter, and shift ****, dont have crossmember but you can Use your Own.

For Everything, im Looking for 600+ Shipping.

the Shift **** and Shifter cost me over 250$

If you arent sure of what a Pro 5.0 Shifter is Look up Pro 5.0

Can also provide you with the stock Shifter and two shift *****.

it DOSENT have: crossmember, OR FLywheel!