Need a Flywheel!
Thread Starter
Member
iTrader: (1)
Joined: Nov 2007
Posts: 189
Likes: 0
From: Toronto, ON.
Car: 1984 Camaro Z/28
Engine: 350 SBC
Transmission: T-5
Need a Flywheel!
I seriously need to get my hands on a flywheel, hopefully someone will reply to this soon cause if they don't i'm going to have to fork over big bucks for a brand spanking new, probably aftermarket one. anyways, If anyone has a 153 tooth to work with a T-5 and a 2pc rear main. if you don't know, know this. if it came off a stock manual f-body 1986 or before its going to work, if its '87 or later, they switched to 1pc rear main seals. anyways, if anyones got one, i hope you're reading this.
P.S i'm also looking for a starter.
P.S i'm also looking for a starter.
Re: Need a Flywheel!
I have one off a 85 Camaro 305 T5 if thats the one your looking for, lmk $75 plus shipping, if interested Ill go pull the part number to make sure its what your looking for, also have a starter from a 89 305 T5 for $10 plus shipping, LMK
Re: Need a Flywheel!
If you have a part number and dimensions..might be able to help. Have a couple of new after market clutch/pressure plates and bearing units..Camaro I think. Also have a couple of used units with "fly wheels" for two piece rear main cranks..not sure what they came out of.
Ed
ziptow@yahoo.com
Ed
ziptow@yahoo.com
Member
iTrader: (3)
Joined: Feb 2007
Posts: 232
Likes: 0
From: CT
Car: 1992 RS
Engine: 01' LS1
Transmission: T56
Axle/Gears: 10 bolt auburn pro posi, 4.10 gears
Re: Need a Flywheel!
I have a used 153 tooth, 2 piece rear main flywheel that has about 2000 miles on it. $50 plus shipping
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Need a Flywheel!
IIRC, there are two available: one weighs about 16 pounds (found on the higher performance cars) and one is about 25 pounds.
JamesC
JamesC
Thread
Thread Starter
Forum
Replies
Last Post
monte87cortez
Transmissions and Drivetrain
2
Sep 26, 2015 08:10 PM
el_muerte
Engine/Drivetrain/Suspension Wanted
0
Sep 16, 2015 12:01 AM







