need upper panhard bar/ brace
Thread Starter
Junior Member
iTrader: (1)
Joined: Apr 2006
Posts: 93
Likes: 0
From: Del Co, Pa
Car: 1986 IROC
Engine: 5.7L L98
need upper panhard bar/ brace
I need an upper panhard bar brace, this mounts to the drivers side using 3 bolts.
My son drove my GTA and curbed the rear, bent axle, rim, rotor, the list goes on.
Got everything together except the bent upper and lower panhard bars are causing a misalignment of the rear in reference to the body.
My son drove my GTA and curbed the rear, bent axle, rim, rotor, the list goes on.
Got everything together except the bent upper and lower panhard bars are causing a misalignment of the rear in reference to the body.
Joined: Sep 2000
Posts: 481
Likes: 1
From: Livermore, Ca. US
Car: Firebird SSA
Engine: 3.1
Transmission: 700R4
Re: need upper panhard bar/ brace
I have a set of stock panhard bar and lower control arms from my 92 I need to pull off. $30 + Shipping. If so I'll take them off this weekend.
Member
iTrader: (62)
Joined: Jun 2005
Posts: 219
Likes: 2
From: milwaukee
Car: 87gta 88gta 88marovert
Re: need upper panhard bar/ brace
I have this but can take it apart and just send the top bar.
https://www.thirdgen.org/forums/engi...s-panhard.html
https://www.thirdgen.org/forums/engi...s-panhard.html
Thread
Thread Starter
Forum
Replies
Last Post
darwinprice
Organized Drag Racing and Autocross
17
Oct 11, 2015 11:51 PM






