Hey all,

I am in the process of building a SBC 400 for my 92 RS. It's a 4 bolt 511 casting. For the bottom end I have used an Eagle cast crank and a Federal Mogul rebuild kit:

http://store.summitracing.com/partde...0&autoview=sku.

The kit came with 12.5cc dish pistons that will give a compression of 9:1 with 76cc heads. I also have a Comp Cams 280H Magnum cam with 0.48 of lift and 280 degrees of duration.

I really do not want to use the crappy *** 882 heads I have, so I was hoping to find a good set of used heads for like 300-400 bucks. I would like to keep the compression below 10:1, so that means its prolly got to be 72cc or larger chamber. I really don't wanna use the vortecs b/c it will spike the compression and I don't think it will handle the lift of that cam. Also, I already have a standard performer RPM intake.

Let me know if you guys have anything you want to get rid of that would work for me.

Thanks!
Jason

 

Lots of good heads on racing junk