Roller cam and liffters Speed Density TPI wanted
Thread Starter
Junior Member
Joined: Mar 2009
Posts: 42
Likes: 0
From: Lagrange GA 30240
Car: 1984 Chevy K5 Blazer
Engine: SD TPI 350 w/FIC Bosch IIIs
Transmission: 700R4 4X4
Axle/Gears: 3.08 front and rear w/ 33" AT tires
Roller cam and liffters Speed Density TPI wanted
I am looking for a good used or new but never used roller cam for my 350Cid speed density tuned port.. let me know what you have please!
I would prefer 214 int and 226 exh duration @.050 and
.468/.520 w/112 degrees would be perfect..
I would prefer 214 int and 226 exh duration @.050 and
.468/.520 w/112 degrees would be perfect..
Last edited by thelast_graham; May 19, 2009 at 06:02 PM. Reason: more info
Member
Joined: Jan 2009
Posts: 104
Likes: 0
From: Fort Wayne, IN
Car: 1989 Camaro IROC-Z28
Engine: Rebuilt 350TPI (see sig)
Transmission: is being replaced...
Axle/Gears: 20 year old G92 Borg-Warner 3.45
Re: Roller cam and liffters Speed Density TPI wanted
what size motor is it? if its a 305 I have a nice 95 LT1 roller cam (no lifters sorry) with only 30k miles on it
runs perfect on stock ecm and prom no tuning required and has highest lift stock heads can take
specs:
203/208@.450/.460 116 LSA
ill sell for $60 plus shipping
send pm if interested
runs perfect on stock ecm and prom no tuning required and has highest lift stock heads can take
specs:
203/208@.450/.460 116 LSA
ill sell for $60 plus shipping
send pm if interested
Thread Starter
Junior Member
Joined: Mar 2009
Posts: 42
Likes: 0
From: Lagrange GA 30240
Car: 1984 Chevy K5 Blazer
Engine: SD TPI 350 w/FIC Bosch IIIs
Transmission: 700R4 4X4
Axle/Gears: 3.08 front and rear w/ 33" AT tires
Re: Roller cam and liffters Speed Density TPI wanted
What do you mean it has the highest lift the stock heads can take.. all i have to do is change the springs right?
Supreme Member
iTrader: (25)
Joined: Feb 2006
Posts: 7,260
Likes: 5
From: Manteca,California. Nor Cal.
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Roller cam and liffters Speed Density TPI wanted
someone in the northern california section is selling a roller camshaft with lifters for 80 bucks, it might be what you are looking for.
Thread Starter
Junior Member
Joined: Mar 2009
Posts: 42
Likes: 0
From: Lagrange GA 30240
Car: 1984 Chevy K5 Blazer
Engine: SD TPI 350 w/FIC Bosch IIIs
Transmission: 700R4 4X4
Axle/Gears: 3.08 front and rear w/ 33" AT tires
Re: Roller cam and liffters Speed Density TPI wanted
how can I get into touch with this guy?
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM
