Stock fully rebuilt heads, rocker arms, pushrods
#1
Junior Member
Thread Starter
Join Date: Mar 2009
Location: Lagrange GA 30240
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Chevy K5 Blazer
Engine: SD TPI 350 w/FIC Bosch IIIs
Transmission: 700R4 4X4
Axle/Gears: 3.08 front and rear w/ 33" AT tires
Stock fully rebuilt heads, rocker arms, pushrods
I am in need of a pair of completely rebuilt L98 heads with rocker arms and push rods.
I have a stock TPI system and stock short block with a stock computer.
I have a stock TPI system and stock short block with a stock computer.
#2
Junior Member
iTrader: (3)
Join Date: Mar 2010
Location: Colorado Springs
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: Hot Wheels
Engine: Stroker 383
Re: Stock fully rebuilt heads, rocker arms, pushrods
I have some corvette L98 128 Alum. heads in good shape but need to be freshened up .400.00 plus ship
#5
Junior Member
iTrader: (6)
Join Date: Apr 2002
Location: Highland Twp MI
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: 383 TPI
Transmission: 700R4 2500 stall
Axle/Gears: 3.70 Moser 9in
Re: Stock fully rebuilt heads, rocker arms, pushrods
I have what you need and they are portmatched to felpro gaskets, new Felpro valve seals and crane valve springs # 14102183. Let me know if interested. And what your willing to pay?
#6
Junior Member
iTrader: (3)
Join Date: Mar 2010
Location: Colorado Springs
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: Hot Wheels
Engine: Stroker 383
Re: Stock fully rebuilt heads, rocker arms, pushrods
I have a freshened up( Valve job ) set of World Products SR Torqer Heads 76 cc , 170/60 runners 2.02/ 1.60 valves ready to bolt on with Crane 1.5 / 3/8's Alum Roller Rockers for 650.00 + shipping
Chris
Chris
#7
Re: Stock fully rebuilt heads, rocker arms, pushrods
I have a set of Comp cams roller tip rockers Part# 1412-16 for $80 and Trick Flow Hardened push rods Length is 7.750 .080. I want $40 for those . let me know if you are interested
Trending Topics
#8
Junior Member
iTrader: (3)
Join Date: Mar 2010
Location: Colorado Springs
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: Hot Wheels
Engine: Stroker 383
Re: Stock fully rebuilt heads, rocker arms, pushrods
Ill do 500.00 +ship( Ill pay 1/2 ) on the world prodct heads no rockers .you can add these ,add HP and TQ and not have to change ecu .these heads can support 500 hp+ .If you go Iron stock head, that is the 882 . light and prone to cracking .
Thread
Thread Starter
Forum
Replies
Last Post