Well this last winter squirrels got under the hood and chewed up my harness right at the block where it bolts to the firewall. They also chewed through the clutch slave reservoir.
I'm looking for the large block that bolts to the firewall, its cover piece, and about 2-3 feet from the connector into the loom. That way I can just leave mine connected and splice and solder everything color to color back the way its supposed to be.
This is for a 91 3rd gen 5.7 TPI SD 7730 ECU. I don't need a whole harness or I would just order one. I just need what was listed above. So if you have a car thats been wrecked and the harness is damaged and your willing to sell just the end and some wire to work with while its still attached to the block that is (I don't have the tools to remove the pins) shoot me a pm.
The Carnage
I'm looking for the large block that bolts to the firewall, its cover piece, and about 2-3 feet from the connector into the loom. That way I can just leave mine connected and splice and solder everything color to color back the way its supposed to be.
This is for a 91 3rd gen 5.7 TPI SD 7730 ECU. I don't need a whole harness or I would just order one. I just need what was listed above. So if you have a car thats been wrecked and the harness is damaged and your willing to sell just the end and some wire to work with while its still attached to the block that is (I don't have the tools to remove the pins) shoot me a pm.
The Carnage
I updated with photos of the mess they caused.