no new tires is making a ton of friends on this forum. I'm sure he'll find what he wants with that stellar attitude. /s

 

Nobody fking cares -

 

ttt

 

I'll make you a pair of those runners. it will cost you $1500 though for my time involved and you must supply the parts.

 

Could have sworn I said no already.

 

Then it looks like youre sh$t out of luck then AND cheap. Youre not going to get someone to sell you a custom made pair of runners that have a lot of hours of fab work in them for under $500!!!

With the amount of time you have wasted posting about these so called runners you want, you could have made them yourself and then took pride in them yourself.

 

Nobody told you to dig up a 14 month old thread. Take your **** poor attitude and hit the red X. $1500 and parts is shear foolishness....

 

You have another thing coming if you think you're gonna be able to buy a custom pair of ported runners for $500!!

A pair of stock imported SLP runners just sold for $650'on eBay. You're crappy attitude throughout this forum isn't going to go too far.

 

I don't care, nor does it matter what some fool paid for on some stock slps.
your just mad that iv -already- told at least 2 people before you "no", when they mentioned some crazy number. If I already told them "no", why would I say yes to you.
example: post #15

I don't have a crappy attitude, thats just weak skinned people like you. You just fell to pieces because you heard what you didn't want to hear.
I know what im doing.

-don't send me any more butt hurt pm's neither
--"haters gonna hate"

 

14 months later and you're not any closer to your goal, but he's the crazy one.

 

I hadn't post in here in months. Thread was dead -

 

Thread is still alive. I have some NOS SLP runners. All someone would need to do is cut them, take out the inner walls & weld back together. You wanted someone else to sell you their investment for pennies on the dollar. There are places to find deals & places with educated sellers. This is a place with educated sellers. I did see a set of SLP runners sell last year to a guy for $10 on Facebook. Possibly that would have been your best avenue & be LUCKY!

 

I already have a set of fully worked (1.75") SLPs, a fully worked base (1.75"/1205) and a siamesed plenum. I paid less than $400 for the whole thing, including buying new stainless hardware.

No thanks guy.

-have a good 1

 

Excellent. However those runners are not fully Siamesed as you had to have. $400 is a good price for what you got though.

 

My intake is the 3rd best mod ever. (1. Procharger, 2. nitrous)

I shift the car at 5600+ rpm, it fking SCREAMS.
Down side is it doesn't "wake up" until after 4500rpm, so im always dumping 1 or second gear.

-I've gotten close to hitting 6K a few times, but I get spooked and let out...