Looking for a used LT4 Hot Cam or cam with similar specs for my L31 build.

I have an ISKY 257/265 RR-257/265 but I found its retro so I cannot use my newer style timing set for 87+. Willing to trade or sell.

Let me know what you got.

 

There is a guy who grinds hotcams and 270 style cams on ebay. search lt1 hotcam on ebay. He grinds with or without fuel pump lobe. Tell him what block you are using

 

I was thinking that too until I read this thread about those cams. Post #4 some guy lost his L98 after one of those cams grenaded in his motor. Not pretty.
http://www.corvetteforum.com/forums/...yes-or-no.html

 

I have a Comp xr276hr-10

Was installed in engine and taken back out. Engine was never even buttoned up. Still have all paperwork.
$175 plus shipping

 

I saw that yesterday. If it were a 112 LSA I would have contacted you. I'm running it with TBI so tuning a 110 may cause me some trouble. I was very tempted. I ended up ordering a new LT4 Hot Cam just today. Thanks!

 

Same reason I don't need it. HAHA!

 

UPDATE: I ended up purchasing a brand new Hot Cam for my build.