Wtb Tpi engine harness and ecm

Closed Thread Subscribe

Thread Tools

Search this Thread

Apr 1, 2018 | 09:11 AM

Flycaster1977

Thread Starter

Junior Member

iTrader: (1)

Joined: Nov 2016

Posts: 36

Likes: 3

Wtb Tpi engine harness and ecm

Im looking for a complete engine harness and ecm for an 86-87 iroc, auto, tpi. i prefer no ac but will work with what i can get. Must be in good shape. Please let me know what u have.

Apr 2, 2018 | 10:15 AM

John in RI

Supreme Member

iTrader: (170)

Joined: Aug 1999

Posts: 5,259

Likes: 460

From: RI

Car: 1984 Camaro Berlinetta

Engine: LT1

Transmission: T56 6-speed

Axle/Gears: 4.11 LS1 Rear End

Re: Wtb Tpi engine harness and ecm

I've got a TPI /Automatic Harness from an 86 IROC; $175 + shipping. Has 2 ground wires @ 1 ECM plug that still need to be spliced. I replaced 1 bad ECM plug & the C207 plug, but didn't splice those 2 wires yet. (ECM plug also wouldn't hold a terminal lock and C207 Plug was broken ) Also have a couple TPI ECMs too, but I don't currently have any way to test the ECM. ( I do NOT save parts that I know to be bad - There is just no room here for stuff I know is crap ! )

The 2 ground wires were pulled out & would not "lock" back into the plug. I installed 2 wired that do lock in place with the replacement plugs - just didn't splice them. Here's what it looked like before I installed the replacement plugs/wires.