[VA] 1988 Camaro 5.7 TPI Automatic Engine Wire Harness
Thread Starter
Junior Member
Joined: Jun 2019
Posts: 2
Likes: 0
1988 Camaro 5.7 TPI Automatic Engine Wire Harness
Just got a 1988 Iroc-Z 5.7 automatic but the mice chewed up the engine harness pretty bad. Looking for a replacement or any help on what other years may be compatible. Thanks!
Junior Member
Joined: Feb 2009
Posts: 20
Likes: 1
From: Buffalo, NY
Car: Anything that handles
Engine: 383
Transmission: 700R4
Axle/Gears: 3.25
Re: 1988 Camaro 5.7 TPI Automatic Engine Wire Harness
Have a underhood harness from a 87 TA automatic trans. Here's the link.
https://www.thirdgen.org/forums/exte...ml#post6321369
https://www.thirdgen.org/forums/exte...ml#post6321369
Joined: Aug 1999
Posts: 5,268
Likes: 466
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 1988 Camaro 5.7 TPI Automatic Engine Wire Harness
87 and earlier used an ENGINE harness and an ECM harness. In 88 those 2 harnesses were combined into 1 huge harness. There were also wiring changes from 87 (V-Belt) to 88 ( serpentine ) as well as a reconfigured Wiper system due to the change to a different wiper motor. 89 should be similar to 88,... but no cold start injector.
Senior Member
Joined: Sep 2014
Posts: 749
Likes: 39
From: Los Angeles
Car: 92 Z28 Clone
Engine: Vortec 350
Transmission: T-56
Axle/Gears: 3.23 Torsen
Re: 1988 Camaro 5.7 TPI Automatic Engine Wire Harness
Thread
Thread Starter
Forum
Replies
Last Post