When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking for the exhaust spacer that I believe is found on the TBI/TPI cars, whereas the carbed cars have the actual valve. And if so what would you like for it shipped to 53146?
I cut out the butterfly in the heatriser on the 305 in my '84 Trans AM. the damn things seize. Not really required. Had a '70 Chevelle L48 engine. Removed the rise because it was seizing.
I cut out the butterfly in the heatriser on the 305 in my '84 Trans AM. the damn things seize. Not really required. Had a '70 Chevelle L48 engine. Removed the rise because it was seizing.
I did the same thing. Removed the butterfly, and welded up the holes. It is now a spacer...
I did the same thing. Removed the butterfly, and welded up the holes. It is now a spacer...
The purpose I have for one is to fill in the space, my headers are smog legal designed for the valve. I just want the correct size spacer, was able to find them years ago fairly easily for my other smog legal header cars. I could modify one but rather just find a factory spacer first.
