what do you think of this gm 350 good wrench engine???
Thread Starter
Senior Member
iTrader: (1)
Joined: Feb 2003
Posts: 908
Likes: 0
From: parishville NY upstate
Car: 86 IROC-Z
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.42s/posi/disc
what do you think of this gm 350 good wrench engine???
i definatley no what im buying this summer.
i just looked at the specs on the engine.
so all i have to do is use the intake and exaust and such of my 305 and put it on the crate engine.
ive got
hooker competition headers (very good shape)
Carter AFB competition series carburater (brand new)
weihin stealth intake. (good condition)
excell spark plug wires (brand new)
Crane Cam
it ses on the web site that the engine puts out 249hp and 304
foot pounds of torque if i throw on the performance goodeys do u think that that it would make even more then 249???
Engine Name: 350 LM1
Horsepower: 249 HP @ 5,000 RPM RPM
Torque: 304 Ft/Lbs @ 3,500 RPM
Compression Ratio: 8.50 to 1
Block: 4 – Bolt, 2 Piece Rear Seal, 4.000” Bore
Crankshaft: Cast Nodular 3.480” Stroke
Heads: Cast Iron, 72cc
Valves: 1.940” / 1.600”
Camshaft lift: 0.390” / 0.410” Hydraulic
Duration @ 0.050”: 195° / 202°
Intake: Not Included
i just looked at the specs on the engine.
so all i have to do is use the intake and exaust and such of my 305 and put it on the crate engine.
ive got
hooker competition headers (very good shape)
Carter AFB competition series carburater (brand new)
weihin stealth intake. (good condition)
excell spark plug wires (brand new)
Crane Cam
it ses on the web site that the engine puts out 249hp and 304
foot pounds of torque if i throw on the performance goodeys do u think that that it would make even more then 249???
Engine Name: 350 LM1
Horsepower: 249 HP @ 5,000 RPM RPM
Torque: 304 Ft/Lbs @ 3,500 RPM
Compression Ratio: 8.50 to 1
Block: 4 – Bolt, 2 Piece Rear Seal, 4.000” Bore
Crankshaft: Cast Nodular 3.480” Stroke
Heads: Cast Iron, 72cc
Valves: 1.940” / 1.600”
Camshaft lift: 0.390” / 0.410” Hydraulic
Duration @ 0.050”: 195° / 202°
Intake: Not Included
Senior Member
Joined: Sep 2001
Posts: 968
Likes: 0
From: Montreal\Quebec|Canada
Car: Camaro Z281991 Engine: 5.7L/350 TPI Transmission: TH700R4 ··································· Car: Acura CL 1998
Engine: 3.0L/183
Transmission: 4 spd auto/OD
Its a good engine though id
change the heads and cam.
CHP did a build up a while ago.
change the heads and cam.
CHP did a build up a while ago.
Senior Member
Joined: Jul 2002
Posts: 548
Likes: 0
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
