I thought i fixed the problem be i guess not. i took my car to work today and on my way home noticed my dash lights get dim and voltage needle go down when i shift. but when i come to a stop it's fine. the lt1 alternater has one wire (red) connecter besides the one that goes to the battery also red. the alternator is new and the battery has been checked and so has the alternator. the harness on the lt1 is complete notthing cut. and everything was already connected. the only thing i did to get it to the votage needle to work when i was doing the swap is connect the red wire (A) from the c220 off of the lt1 to ignition. can any one help on this thanks