If some of you remember I got screwed by a shop with my 69 Camaro.

My question is this...

I have Dart Pro 1 heads but I dont know if I got what I paid for.
My reciept I got from the business said I paid $1400 for both complete heads.
But it doesnt say what size. I wanted the 215's, I think I got the 200's
They are the straight plug style head. How can I tell what size the heads are without pulling them off the motor? I cant touch the motor until court is over.

Does the receipt have a part number for the heads?

I never got a reciept of purchase from the shop. I only have my reciepts of the money I gave them which was used to purchase the heads and othere parts.
They only wrote down Dart Pro 1 heads on the reciept with the price. I dont trust there word as they have tried to screw me before.
The only thing I have is the numbers off the side of the cylinder head.

200 part #s

215 part #s

The dart heads I have here (180 Iron Eagle) have a "180" cast in the top of the head ( under the vave cover) and a "72" stamped on the end. (combustion chamber size). Your's should have simular Id marks. Pull a valve cover off and look.

The number is stamped on the outside of the head, on the end. Look just above the head gasket on the right side. It will have a 113, 115 or 117 to start.

113=200cc
115=215cc
117-230cc

Jerry