New engine into rolling chassis
Thread Starter
Member
iTrader: (4)
Joined: Oct 2005
Posts: 378
Likes: 0
From: Long Island,NY
Car: Bone stock 1989 Iroc T-Top,1991 Z28
Engine: 5.7, Carbed 383
Transmission: 700r4, T-56
New engine into rolling chassis
Need a little info. I have a motor that I had built. I was plannig on putting it into my TPI Iroc but I found a really good deal on a 91 Z-28,no motor/trans. The ecm and all wiring is in the car. The motor I have is bare,no brackets for accessories. I was going to swap everything from my Iroc. Question is, What year,make,model cars/trucks can I get all the brackets from? A/C,alt,ps etc. I have a line on a 91 rs TB car, Besides the dual fan setup and tb,are all the brackets usable to swap into the 91. The motor going in is a an HSR setup. Thanks!
Supreme Member
Joined: Jul 2001
Posts: 4,461
Likes: 0
From: BFE, MD
Car: 13 Ram 1500/ 78 Formy
Engine: 5.7 / 7.4
Transmission: 6sp / TH350
Axle/Gears: 3.55 posi / 3.23
(disclaimer-- I'm not an expert in sbc things) from what I've seen/read, as long as all the brackets/accessories are from the same yr, they should swap out.
A quick/easy guide might be to peruse applications for underdrive pullies.
A quick/easy guide might be to peruse applications for underdrive pullies.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Sep 17, 2020 08:26 AM